Warehouse beam rack

The beam rack is a professional warehouse rack for the purpose of storing and storing pallet goods. The beam rack is composed of column pieces (columns) and beams. The beam rack has a simple structure and is safe and reliable. It has the characteristics of heavy bearing capacity, wide range of high adaptability, mechanical access, and high efficiency of selection, but the space utilization rate is average. 

Column piece: The beam rack is made up of two columns, cross brace, and diagonal brace connected by nylon self-locking bolts. The combined structure effectively prevents the rack from losing stability after the bolts are loose. Double rows of diamond-shaped holes are punched on the columns, and the hole pitch It is 75mm or 50mm, so the beam can be freely adjusted up and down in units of 75mm when it is hung on the column.

Crossbeam: The crossbeam rack is welded together by two column clamps and the crossbeam rod. The crossbeam is welded by two specially made welding beams, which doubles the thickness of the top and bottom of the crossbeam. This structure is based on the design theory of steel structure. , It makes full use of the material's anti-load capacity, has the characteristics of light weight, strong bearing capacity and low cost. 

Features and advantages

1. The structure is simple, safe and reliable, and the combination can be adjusted arbitrarily, and the entry and exit of the warehouse is not restricted by the order of the items. It is widely used in the storage mode of pallet storage and forklift storage and retrieval.

2. The column piece is made up of upright columns, horizontal braces and diagonal braces connected by bolts. Column pieces and C-shaped welding beams are inserted to form a shelf frame, which is fixed by safety pins, and the structure is simple and reliable. Each layer can be adjusted freely up and down in 75mm or 50mm steps. 

3. The beam rack has the characteristics of large moment of inertia, strong layer load capacity, and strong impact resistance. The maximum layer load of each layer can reach 5000kg/layer under the relative design.

4. The plastic type is very large, and mold shelves, attic shelves, three-dimensional warehouse shelves, etc. can be built on the basis of pallet shelves, and can also be made into special oil drum shelves.

5. The beam rack can effectively increase the storage height of the warehouse and increase the space utilization rate of the warehouse. Suitable for storage of various types of goods. To

6. The appearance is safe, and to prevent the forklift from colliding, it can also increase the column foot guard and anti-collision bar. In order to make the layer load safer, ancillary facilities such as beam shelving, layer slabs, and mesh span beams can also be placed on the beam. To

7. Low cost, convenient installation and operation, easy to find cargo location and suitable for any handling tools. 

8. The beam rack can also be equipped with laminates, which can be steel plates, dense ammonia plates or grids. In order to use pallets of different sizes.