The method of install mezzanine rack- News - Guangzhou HEDA Shelves Co.,Ltd

The Method Of Install Mezzanine Rack

November 14, 2018

The installation method and steps of the attic shelf are as follows:

(Note: At least 3 professionals are required to install the attic)

1. The first installer erects the main column to balance the pull-up distance. According to the length of the beam, the second installer can hold the bottom layer first, and the two ends of the beam are aligned with the bottom of the column. Card slot.

2. Force the beam down until the two ends are all stuck in, and then install the 2.3.4 layer, which can be installed according to the level of use.

3. Two beams are required for each layer. When loading, you can first position the holes to position them. The left and right sides and the two ends should be balanced at one height.

4. After the beam is installed, the layer can be directly placed on the beam, and the pressure can be flattened.

5, Inspection and acceptance, the attic is completed, need to check whether the department has been installed, whether the card is stuck, check the goods can be placed directly.