Safety matters when using heavy-duty racks

1. The use of heavy-duty Guangzhou shelves should be top-heavy: the principle of placing light goods at the top and heavy goods at the bottom should be achieved.

2. Prevent overloading when using heavy-duty Guangzhou shelves: the weight of each layer of goods stored must not exceed the maximum load capacity of the Guangzhou shelf design.

3. The use of heavy-duty Guangzhou shelves should prevent ultra-high and ultra-wide: The height and width of the Guangzhou shelves have been restricted, and the size of the pallets and goods should be slightly less than 100mm of the clear space.

4. The use of heavy-duty Guangzhou shelves should be anti-collision: the forklift should be handled with care as much as possible during operation.

5. When using heavy-duty Guangzhou shelves, when there are goods placed on the top of the Guangzhou shelves, the operator should try not to directly enter the bottom of the Guangzhou shelves.

6. The use of heavy-duty Guangzhou shelves should prevent the use of non-standard floor boards (card boards) on the Guangzhou shelves, and the bottom of the word "Chuan" is the most suitable.

When using heavy-duty Guangzhou shelves, when the height of the goods exceeds eight meters, a special attention should be paid to the need for corresponding loading and unloading machinery.

Because the total amount of channel area required is large, the storage density is smaller than other systems.

   The layer height of the heavy-duty Guangzhou shelf is adjustable, equipped with various types of forklifts and stackers. The heavy-duty warehouse Guangzhou shelf can realize quick access to various pallets, and the maximum unit size can reach 2000KG, which is the most commonly used storage method in various industries. . Each pallet can be stored or moved separately without moving other pallets. Can adapt to various types of Guangzhou shelves. Heavy-duty storage Guangzhou shelves can adjust the height of the beam according to the requirements of the size of the goods. The cargo circulation is large and the loading and unloading is fast. The supporting equipment is the simplest, the cost is the lowest, and it can be installed and disassembled quickly.