News

   Thanks for our dear customers' supports over the years, our Company has a full reduction activity, as long as you send us the following coupons, there will be a discount, only the top 100

The installation method and steps of the attic shelf are as follows: (Note: At least 3 professionals are required to install the attic)1. The first installer erects the main column to balance the pull-up distance. According to the length of the beam, the second installer can hold the bottom layer first, and the two ends of the beam are aligned with the bottom of the column. Card slot.2. Force the beam down until the two ends are all stuck in, and then install the 2.3.4 layer, which can be installed according to the level of use.3. Two beams are required for each layer. When loading, you can first position the holes to position them. The left and right sides and the two ends should be balanced at one height.4. After the beam is installed, the layer can be directly placed on the beam, and the pressure can be flattened.5, Inspection and acceptance, the attic is completed, need to check whether the department has been installed, whether the card is stuck, check the goods can be placed directly.

In order to improve the efficiency of warehouse utilization, make full use of warehouse space, and increase the storage capacity of warehouses, It is necessary to use racks. Shelf is an indispensable tool for logistics storage and transportation. So what are the common shelves in the market, and how should companies choose the suitable shelves?First, the classification of racksAccording to different standards, the classification of shelves is also different. Mainly classified according to fixed or mobile.The shelves are fixed or mobile and are divided into fixed shelves and mobile shelves.Second, the structural characteristics, application scope and selection principle of various shelf systems.1. plate type shelves  2. pallet type racks  3. drive through type shelves 4. Gravity shelves     5. Press-in shelves  6. Mezzanine Racking7.cantilevered racks   8. mobile racks      9.steel structure platform10. drawer racks      11. rotating shelvesThe commonality of these shelf systems is mostly combined assembly light steel structure, the surface is mostly electrostatic spray treatment. With the rapid development of the logistics equipment industry, it is believed that the technical content and precision of the shelf system will become higher and higher, the structure will be more optimized, the variety will be more complete, and the adaptability will be more extensive. It will play an important role in the development of China's logistics industry.Whether you know how to choose the right storage rack, just contact us, help you solve all problems, Guangzhou HEDA Shelves Co.,Ltd warmly welcome you !  

1.High quality standard retail units supermarket gondola shelving2.Heavy Duty Cold-rolled Steel Rack Gondola Supermarket Shelf3.Guangzhou Used Display Shelf Supermarket metal display gondola shelf rackAnd more! welcome to contact us!

Proper use of the pallet, the goods on the pallet should be properly packaged, bundled and wrapped to facilitate the use of mechanical loading and unloading and transportation to meet the requirements of handling and storage.1.pallet load capacity; the load capacity of each tray should be less than or equal to 2t. For the safety during transport, the center height of the loaded cargo should not exceed 2/30 of the pallet width.2. Palletizing method of palletized goods: According to the type of goods, the quality of the goods carried on the pallet and the size of the pallet, it is reasonable to determine the order of the ordering on the pallet.Problems in the storage of pallets1. wooden pallets are poor in water resistance, easy to be deformed by moisture, and should not be placed outdoors.2. Plastic pallets should be placed neatly to prevent mechanical damage, avoid sun exposure and aging, and shorten the service life.3. Steel trays should be protected from moisture to avoid rust, and keep away from radioactive chemical materials.4. Composite trays should be protected from mechanical bumps.5. After the tray has been used for a period of time, it will be damaged for various reasons and should be repaired in time to maintain its service life. Replace damaged parts, such as wooden pallet panels, for pallets that can be combined. The pallets that are damaged overall should be replaced in time.

The main functions of storage racks are:(1) Storage goods    It is the most basic function of warehousing. It mainly stores items to avoid losing or damage. And handle the group's operations reasonably and usefully.(2) Distribution processing   Scientific and reasonable warehousing decisions and warehousing procedures can be used to reduce overall warehousing costs and logistics costs. Different types of production and forms of sale require different strategic plans and forms of handling.(3) Supply information   Modern warehousing has gradually evolved into a modern logistics distribution base integrating circulation processing and distribution.(4) Conditioning transportation capacity    Warehousing supplies information to all systems, It is a major symbol of modern warehousing. (5) Reduce material costs, etc.    It is different transportation capacity of various transportation vehicles, and the transportation cost and inventory cost are reversed.    At present, this large market in China, storage shelves occupy a large number of warehouses, supermarkets, all walks of life. It is no exaggeration to say that the storage shelf is a rapidly growing industrial product that can be seen in many fields. With the advancement of technology, more storage shelves will be developed, and more varieties will be used in the future, and more functions will be developed.

Cantilever racks are being used for storing tubular products, styructure products section aluminum and many products with long and big size. Materials are stored and fixed on the arms by side forklifts or stacker cranes. This type is suitable foe the warehouses with limited space and low height and widely being used in mechanical industries and supermarket of building materials.

Radio shuttle rack is an entire new idea and storage revolution. It has the advantages of drive-in rack and live rack. FIFO and LIFO can be easily realized. This system consists of forklift, racking system and shuttle. Forklift carries goods onto shuttle. Shuttle automatically take the goods into racking system and realize the storage fuction. Radio shuttle can work continuously, so the work efficiency is enhanced. the shuttle can be charged more than 1000 times and easily maintained.

Mezzanine racking is made of shelf pillars for floor support, steel structural slabs, flat slabs, strong overall load capacity and uniformity, low cost, fast construction, suitable for high warehouse, small and more goods, manual access, to well utilize the management of warehouse.There are many advantages to using Mezzanine racking:1. Mezzanine racks are suitable for storing a variety of types of items.2. Mezzanine racks can increase the shelf height, make full use of the storage height, and make better use of storage space.3.Mezzanine racks floor uses columns and steel plates, which makes it have a high layer load capacity, good integrity, uniform layer loading and flat appearance.4.Mezzanine racks fully consider humanized logistics, beautiful planning, generous structure, strong sense of three-dimensional, the material is excellent carbon structural steel, internal quality, carrying function, appearance are very superior, convenient installation, disassembly, can be sensitive according to the field .Fully combined structure, strong stereoscopic effect, high quality steel, high quality, good appearance. According to the needs of practical places, sensitively planned into a two-storey or multi-storey loft, suitable for storing a variety of small quantities of goods. Mezzanine racks is flat, so the dust, debris and small pieces will not fall into the downstairs. It is widely used in cars, electronics, machinery and other occupations.According to the practice site and specific requirements, it can be planned into a multi-storey floor, generally 2 to 3 floors. The bottom shelf can use a variety of shelves such as medium duty racks and heavy duty racks.Mezzanine racks are equipped with auxiliary facilities, such as stairs, guardrails and electric lifting channels.

Proper use of the shelves can add slack, extent of service life,and save money. Pay attention to the following items when using racks.1. The main use of wooden racks is to prevent moisture. If the wooden shelves are damp, they should be dried in the sun. Others should pay attention to the air, otherwise the shelves are easy to be mildewed and even peeled. Since wooden shelves are more flammable, pay attention to fire prevention when using them.2, metal racks should also pay attention to moisture, if it needs to be wiped dry with a clean rag, otherwise the shelves are easy to rust. Also pay attention to the paint and screws of the metal shelves.3, the use of glass racks should pay attention to shockproof, but can not carry heavy loads.4. Anti-overload: Each layer of cargo storage does not suffer from the minimum load that exceeds the shelf assumption.5, anti-super high and noble width: shelf height, layer width has been limited, the size of the card board and goods should be slightly in the net space 100 sister.6, anti-collision: the forklift is in the process of running, should be handled with care.7, anti-heavy weight: should be high-level light goods, the bottom of the heavy goods standard.8. Stop using the unregulated floor plate (card board) on the shelf, and the bottom of the river is the most appropriate.9. When there is a cargo on the top of the shelf, the exclusive staff does not have to go straight into the bottom of the shelf.

   Tool Display Stand can be used with hook,light box (with light or without light), layer board, advertising board,bottom ark etc.We will introduce these three type Tool Display Stands to you, which type you like, pls feel free to contact us.We also can supply you all kinds of rack and shelf , such as warehouse rack,supermarket shelf and so on!1. Peg/Punching board Tool Display Stand2. Volcano board Tool Display Stand3. Slat board Tool Display Stand

1. Pretty and simple , stable organization, and diverse specifications; it is assumed that the appearance of the appearance is discouraged. The supermarket shelves are single and double-sided shelves can be connected to each other. The single-sided shelves can be connected with the corners, and the double-sided can be connected with the semi-circle. The layer spacing can be adjusted at will, and it is obvious;2.The Appearance is luxurious and elegant, and are integrated with the current market conditions, creating a new concept of trade;3. Raise the root of the support arm, increase the support power, make the width and length of the laminate smaller, and meet the capacity of small commodities in small market.4. The skin phase is treated by epoxy resin electrostatic spray, which has a variety of colors, and has strong anti-corrosion and anti-rust results;5. The column and the base are welded together, and the safety factor of the shelf is increased, and the shelf is being mutated under the heavy state to eliminate the hidden dangers of the market;6. Good versatility, equipped with all kinds of merchandise display common accessories, suited for a comprehensive market.