News

The types of supermarket shelves can be divided into the following types according to materials:Iron shelf: The iron shelf is made of ordinary iron, and its cost is relatively cheap, but the display effect is general, the shelf is easy to rust and corrosion, and most shelf factories have already eliminated this shelf.Steel shelves: Steel shelves are made of cold-rolled steel. The effect is similar to that of iron shelves, but the load-bearing and corrosion-resistant capacity is much higher than that of iron shelves. The price is slightly more expensive than iron shelves, but still More economical, and nowadays many supermarkets use this kind of shelf.Steel-wood combined shelves: steel-wood combined shelf materials are cold-rolled steel and wood, showing good results, especially when the lights hit the shelves, and the high-end grades. The load-bearing capacity of steel-wood combined shelves is better than the former two. The maintenance and installation is more convenient, which is the development trend of supermarket shelves in the future.Wood product shelf: The wood shelf material is wood, the display effect is good, and some high-grade goods are generally placed at a slightly expensive price.http://www.hedaracking.com

1. Not overweight, each attic shelf has its maximum load, avoiding overweight is the most important guarantee to improve the safety of the attic shelf.2. Add a guardrail to the attic and add a 1.2-1.5 m guardrail around the attic. This can be done by the designer when designing the attic.3. When there is goods at the top of the shelf, the operator should not directly enter the bottom of the shelf.4. Chain link between the shelf beam and the column, plug in the safety plug.5. Follow the principle of heavy goods and light goods.6. Try to keep the shelf surface dry.7. Regular maintenance.

It's so nice to get feedback from customer.this is a new project of wooden and metal rack.we make high quality shelf to help customer open store successfully.congratulations.Wooden rack, miniso shelf, store shelving,www.hedaracking.com

There are many types of shelves, and the pharmacy shelves are the same. Pharmacy shelves can be divided into the following styles.New pharmacy shelves are lightweight shelves that can be assembled freely. Depending on the placement of the goods, it can be divided into wall shelves, promotional shelves and prescription cabinets and cool areas freezer, these shelves are the pharmacy shelves that every pharmacy must have. Depending on the material, these pharmacy shelves can be divided into back-net shelves, acrylic shelves, wooden shelves and hole back shelf, which are common pharmacy shelves.When we choose, we can choose according to our own needs, avoiding the choice of mistakes and bringing you losses.www.hedaracking.com

1. Three-dimensional structure, which can make full use of warehouse space, improve warehouse capacity utilization, and expand warehouse storage capacity;2. The convenience of cargo access can improve the first-in-first-out, 100% selection ability, and smooth inventory turnover;3. The goods in the warehouse racks are clear at a glance, which is convenient for inventory, division, measurement and other important governance work;4. To meet the needs of large-volume bulk cargo, a wide variety of storage and centralized management, and with the mechanical handling tools, the same order of storage and handling can be achieved;5. The goods stored in the shelves are not squeezed by each other, the loss of materials is small, the function of the capital body is fully guaranteed, and the possible losses of the goods in the storage link are reduced;6. To ensure the quality of stored goods, measures such as moisture, dust, burglary and vandalism can be taken to improve the quality of material storage;7. Meet the management needs of the logistics supply chain with low cost, low loss and high efficiency.8. The bearing capacity is large, it is not easy to be deformed, the connection is reliable, the disassembly and assembly is easy and diversified, and the surface of all shelves is treated by pickling, phosphating, electrostatic spraying, etc., anti-corrosion and anti-rust.www.hedaracking.com

The first stages of Canton Fair ClosingThanks for all friends visiting our booth and show room during Canton FairHope all you have a nice trip in Guangzhou!!Heda Shelves, your trusted racking and shelving specialists.

Light duty rack are a type of storage shelf. It is distinguished and named according to the Weight Capacity of the shelf. According to this division principle, the load capacity of light shelves in all storage shelves is small. Usually the shelf carries ≦150kg/layerFully assembled structure, easy to combine, install and disassemble.Optimization of the cross-section of the shelf material, selection of various pipes, and improvement of bearing capacity.the board has a choice of wood and steel, the height of the column is adjusted to 50mm per hole, the layer can be adjusted according to the height of the goods.the surface treatment is polished, surface rust removal, oil removal, electrostatic powder spray treatment, can be sprayed according to the customer's specified color, has the advantages of beautiful color, not easy to oxidize, easy to clean.the capital investment is small, widely used in warehouses, shopping malls and other storage needs. 

Warehouse Storage racks are storage devices, which are based on packaging, transportation, loading and unloading, sorting, and information management are the six basic functions of logistics. With the continuous development of the storage shelf industry in 2014, more and more industries and enterprises have applied to the storage shelves, and more and more enterprises have entered the storage industry. Serve friends from all walks of life. Shelves are one of the main facilities for warehousing. It can be said that shelves are an integral part of modern industrial warehouses, logistics centers and distribution centers.We can supply you Light Duty Warehouse Rack, Medium Duty Warehouse Rack, Heavy Duty Rack, Shuttle Rack, Cantilever Rack, Mezzanine Racking, Carton Flow Rack, Drive-in Rack, Light Duty Shelving and so on. Any need pls feel free to contact us! www.hedaracking.com

     Today is the Second day of Canton Fair. Welcome You To Visit Our Booth (Zone C,16.3 B10-11).Customers are very satisfied with our high quality products and best service, they give us a big smile like the below picture.      www.hedaracking.com

   First day of The 125th Canton Fair.   Many customers visit our booth, and then some customers visit our office and Exhibition hall, because our office and Exhibition near the Canton Fair, Located in 2nd Floor, No.183, TingYuan Road, XinGangDong Road, Haizhu District, Guangzhou.   Welcome to visit our booth: Zone C,16.3 B10-11, if you are interested in our warehouse rack and supermarket shelf, also warmly welcome you to visit our office, Exhibition hall and factory.    Heda shelf is your best choice !!! Looking forward to make business with you! Any need, pls feel free to contact us.

    Malaysia biggest household products store case photo! Good quality,good looking!    If you have a new shop,  need to display Products ,Please don't hesitate contact us, looking forward to your coming!

Store all storage locations in the entire warehouse in a certain order according to their ground position. The numbers of the warehouses and shelves can be written on the outer wall of the warehouse or on the warehouse door. The numbers should be clear and eye-catching and easy to find.According to the actual situation in the warehouse, according to the distribution of dry and branch roads in the warehouse, it is divided into several cargo spaces, numbered sequentially, and clearly marked according to specific conditions. Since a cargo space often stacks a variety of different varieties, specifications, grades of goods, in order to distinguish the exact storage location of each commodity, it is generally necessary to divide the paragraphs in the same distance on the cargo space, and then add the paragraph number.In warehouses that send and receive sporadic goods and assemble operations, there are often many shelves in a warehouse, and each shelf has a number of compartments as inventory locations. You can first number the shelves in a warehouse, and then number the positions of each shelf by layer and bit. The order should be from top to bottom, left to right, and inside to outside.There are two common methods for the freight yard number: one is to first arrange the number on the whole yard, and then to sort the position number according to the order of each position; the other is not to sort the number, directly according to the goods position. For the container yard, each bin should be numbered, and the box door and the four-corner position mark should be drawn.