Mezzanine rack installation

First, a person holds the column upright and balances the drawing distance. It can be based on the length of the beam. The other person hold the beam, can be loaded with the bottom layer, and the cards at both ends of the beam are aligned with the card slot at the bottom of the column. 

Then use the ground to shoot the beam down until both ends are stuck in, and then install 2,3,4 layers, which can be installed according to the level of use. 

The third step, each layer needs to be equipped with two beams. When loading, some holes can be first positioned for positioning, and the left right and the two ends should be balanced at one height.

The fourth step, after the beam is installed, the layer can be placed directly on the beam, and the flat pressure can be flattened.

The last step, inspection and acceptance, after placing the installed shelves in the designated area, carefully check whether all of them have been installed, and the goods can be placed directly without any problems.

As a new type of composite storage system, Mezzanine rack is fully utilizing the advantages of the stereo storage rack and the convenience of nearby inventory under the platform. Moreover, the construction of the racking system makes full use of the warehouse and various possible object support, so that this seemingly relatively complicated storage system can fully utilize its own characteristics to better serve its own warehousing.