Blog

Cantilever racks are mainly racks composed of column pieces, cantilever beams and connecting rods. Its characteristic is that the forward cantilever structure is light and handy, the carrying capacity is strong, and it can store non-standard or long pole materials, which can greatly improve the warehouse. Utilization rate and work efficiency, cantilever racks can be single-sided or double-sided.After adding wood or steel grating, it is especially suitable for warehouses with small space, low density, easy management, and wide vision. It is widely used in mechanical processing and building materials supermarket industry.Features of cantilever racks:Cantilever shelves are one of the categories of storage shelves. It adopts special profile column and high-strength cantilever, which is suitable for storage of various long materials, ring materials, plates and irregular materials. The cantilever extending forward can be single-sided or double-sided, and has the characteristics of light structure and good bearing capacity. The single arm carrying capacity can reach 1000kg. The special reinforced column structure can bear the pressure of 2000~3000kg. The post-pull design improves the overall stability of the shelf, the installation is simple, and the accessories are complete. Combined structure, special profile column, design back pull, increase stability, high-strength cantilever (arm can be single-sided or double-sided), light structure, good carrying capacity, high space utilization; after adding shelves, it is especially suitable for space Small, low-height warehouse. It is easy to manage and has a wide field of vision. Compared with ordinary shelf-type shelves, the utilization rate is higher. According to the carrying capacity, it can be divided into three types: light, medium and heavy.1. Use square tube production: According to the corresponding cantilever layer loading requirements, the cantilever rack first selects the square tube that meets the layering requirements, cuts it into the required size, welds a non-slip protective plate at one end, and welds the U-shaped column connector at the other end. Make.2. Made of C-shaped steel: According to the corresponding load requirements of the cantilever layer, the cantilever rack first selects the C-shaped steel specification. After selection, two pieces of C-shaped steel are butt welded, and after welding, the other end is welded to the U-shaped column connector.The cantilevered column and the column member are connected by connecting rods, and the connecting rods are usually made of rectangular tubes. In order to increase safety and stability, a flat iron backing is applied to the connecting rod to tightly fix the column.3. All the cantilever shelf parts are semi-finished after production and will be sprayed through the last process. Before injection molding, the shot blasting machine first performs shot blasting, degreasing, rust removal, and then injection molding. The package is shipped after completion.

   Heavy-duty beam type racking is the most common type of racking in various storage racking systems; the fully assembled structure in the form of column pieces + beams has a concise and effective structure. The most simple and effective diversified storage rack, working with forklifts, and using convenient pallet access methods, suitable for storing all kinds of goods. The high turnover rate is the shelf widely used by many enterprises.   The heavy-duty shelves are all made of high-quality steel, with stable quality. The accessories are connected by hanging pieces, which is convenient for assembly. The beam is adjustable and can be used with a variety of accessories.Load: 800～4000KG/layer. Shelf specifications can be customized according to different spaces and goods.Features1. Normally, the goods are stored on the shelf after being assembled through pallets, storage cages and other unit container equipment;2. It is one of the most common and widely used shelves, suitable for most warehouses or product goods;3. With 100% random picking characteristics of goods. Handling machinery such as forklifts can reach any cargo location for storage operations, and storage operations are convenient and fast;4. Use mechanical handling equipment for storage operations.Customer exampleHeavy-duty racks are widely used in manufacturing, e-commerce warehousing, third-party logistics and distribution centers, etc., which are suitable for many types of small-batch items, as well as small-variety and high-volume items.

Cross-beam racking is a type of warehouse racking for the purpose of storing and storing pallet goods. A pallet represents a position, so it is also called position-type racking and pallet racking. The main structure of cross-beam racking is composed of beams and columns, and the structure is simple. Safe and reliable. The pallet load-bearing capacity, pallet size, actual warehouse space and shelf height can be designed according to the actual use of the user.The beam type shelf has high space utilization, flexible and convenient access, simple supporting equipment, low cost, quick and convenient installation and disassembly, so it is widely used in manufacturing, third-party logistics and distribution centers. The beam type rack is suitable for storing multiple varieties, small batches or small varieties and large batches of goods. In addition, beam racks can be used not only in small warehouses, but also in high-rise warehouses and super high-rise warehouses.The main features of beam type shelves:1. The structure is simple and safe, and the assembly type can be adjusted and combined at will. The entry and exit of goods is not restricted by sequence, and it is suitable for storing various types of goods.2. Low cost, convenient installation, convenient and simple operation.3. With 100% cargo picking characteristics, it is suitable for the storage and retrieval operations of any handling equipment, which is convenient and quick.4. It can effectively increase the storage height of the inventory and improve the space utilization rate of the warehouse5. The height of each layer can be adjusted freely in integer multiples of 75mm.

Angle steel shelf is a kind of light shelf, using high-quality cold-rolled steel plate, stamping and forming, easy to disassemble, easy to adjust, flexible combination, strong transformability, and can increase or decrease the number of layers according to the customer's placement requirements to achieve The best storage effect. Composed of columns and steel laminates, it is suitable for manual access to lighter goods. It can be used with plastic turnover boxes to store a variety of small products. It is widely used in the electronics industry and small parts warehouses. It can be changed by spraying powder or laying special rubber. The board realizes anti-static function, has the characteristics of low cost, safety and reliability, simple assembly and disassembly, and can be used alone or freely spliced into various arrangements.

The shuttle rack is a high-density storage system composed of shuttle racks, radio-controlled trolleys, and forklifts. The trolley is on the track under the pallet and can run against the pallet. The racking system has high storage density and convenient access to inventory. The access method of goods can be first-in first-out, first-in-last-out, safe and efficient.Features:1. High-density storage, extremely high utilization rate of the warehouse;2. High work efficiency, greatly reducing the waiting time of work;3. The lighting requirements are relatively low, compared with other types of shelves, the overall investment is less;4. The safety factor is high, reducing the collision between the rack and the forklift, and improving the safety and productivity;5. The operation method is flexible, and the storage and retrieval method of the goods can realize first-in first-out or first-in-last-out.Scope of application: Widely used in industries with large quantities and small samples, such as food, beverages, chemicals, tobacco, and other industries with single varieties and relatively single items; cold storage operations: such as reducing low-temperature operation time, improving work efficiency and operating safety. Time limit management: warehouses that have strict requirements on batches of items and require first-in first-out operation managemen

(1) The cantilever loft is a fully assembled structure, which is convenient and simple to install and disassemble.　　(2) The material cross-sections of the columns, main beams, and auxiliary beams of the cantilever loft are optimized, and the load-bearing capacity is strong.　　　(3) The exterior of the cantilever loft is treated with electrostatic powder spraying, and the appearance is beautiful and generous.　　　(4) The cantilevered loft can be flexibly designed into a two-story or multi-story loft according to the actual needs of the place, and the indoor space can be used flexibly.　　　(5) Single-sided or double-sided cantilever, light structure, good load capacity, single-arm load-bearing up to 500KG, the number of cantilevers can also be increased or decreased according to the actual length and weight of the stored goods.　　　(6) Floor bearing weight and floor slabs can be planned and designed according to actual requirements.　　　Application scope of cantilever loftCantilevered lofts are mainly used in aluminum profile factories, door and window factories, water pipe factories and some manufacturers that mainly produce strip and tubular goods.

The cantilevered loft shelf can be said to be a more classic combination shelf. This combination shelf is composed of a loft platform and a cantilevered shelf. The attic platform is composed of double columns and external and internal beams. The cantilever is installed on the column to form an attic platform. Reach the space of two-layer cantilever shelves, suitable for storing long materials, ring materials, plates, pipes and irregular goods. The cantilevered racking loft platform can be cantilevered racking on the upper and lower floors, or the upper layer can only be used as a platform, and the lower layer is a cantilevered racking. Only the cantilevered racking column is used as a support, so that the upper and lower floors can be accessed Cutting. It not only satisfies the advantages of cantilevered shelves, but also can use the multi-layer structure of loft-type shelves. The number of layers can be increased or decreased according to the actual situation of the warehouse. It is more suitable for warehouses with not very large space but high height. At the same time as the upper space, it also facilitates the management of the warehouse by the enterprise, and has a better space utilization rate than ordinary cantilever shelves.

(1) Selected materials.The weight of the cargo determines the material we use when designing the attic platform. If your warehouse is too wide and requires strong bearing capacity, then we will choose I-beam to design for you. Because the I-beam has a large span and strong load-bearing capacity. If your warehouse is narrow, then we will choose channel steel or hug uprights to design for you.(2) The height of the attic platform.In our design, the height of the loft platform depends on the height of your warehouse. If your warehouse is 5m high and uses manual pick-up, then we recommend 2.2 meters for the first floor and 2.5 meters for the second floor. So whatever space you want to put on your platform is enough. If your warehouse is only about 4 meters, then we recommend that you set the first floor to 1.8 meters, and there are about 2 meters above it. Because the height of our countrymen is generally around 1.7-1.8 meters, this determines the first floor.(3) The material of the floor panel.In order to meet the needs of fire inspection and safety, we usually recommend that customers use a steel plate or a design of one layer of wood + one layer of steel. After all, safety is the most important.(4) Whether it is convenient and fast to pick up the goods up and down.That is, the position of the stairs and elevators. In our design, the position of the stairs is generally at the corner or on the wall, which does not affect the work and does not take up too much space. The elevator is generally determined according to the import and export of goods in the customer's warehouse. Everything is for the convenience of customers.

The shuttle rack is a high-density storage system composed of shuttle racks, radio-controlled trolleys, and forklifts. The trolley is on the track under the pallet and can run against the pallet. The racking system has high storage density and convenient access to inventory. The access method of goods can be first-in first-out, first-in-last-out, safe and efficient.Features:1. High-density storage, extremely high utilization rate of the warehouse;2. High work efficiency, greatly reducing the waiting time of work;3. The lighting requirements are relatively low, compared with other types of shelves, the overall investment is less;4. The safety factor is high, reducing the collision between the rack and the forklift, and improving the safety and productivity;5. The operation mode is flexible, and the access method of the goods can be realized first in first out or first in last out.Scope of application: Widely used in industries with large quantities and small samples, such as food, beverages, chemicals, tobacco, and other single-variety, large-volume, relatively single-item industries; cold storage operations: such as reducing low temperature operation time, improving work efficiency and operating safety. Time limit management: warehouses that have strict requirements on batches of items and require first-in first-out operation management.

1. Promote the sales of slow-moving products.2. Give priority to the products with the largest profit points in the supermarket.3. The similar products are placed together to facilitate customers' shopping.4. Featured divisions to improve competitiveness. For example, separate the special products of this supermarket into a district.5. Consider the handling of goods when they are put on the shelves. Do not place heavy items on multiple shelves, as this is not conducive to replenishment and withdrawal.6. The layout of the space is reasonable. Some products are larger and some products are smaller. The layout should be unified according to the size of the products and the situation in the mall.

1. Combined assembly, mainly composed of pillars, guide grooves, drawer layers, pull rods, positioning pins, etc.,Bolt connection, stable structure, safe and reliable, generally used in rows.2. The drawer tray is mainly composed of slide rails and drawer trays. The drawer tray is composed of a frame welded by a rectangular tube and a bent piece and a steel plate.Each slide rail is fixed up and down by two bearings, which can roll freely in the guide groove with low resistance and can be easily pulled out of the drawer.3. For safety reasons, the drawer tray of the drawer rack is designed with positioning pins and limit pins to ensure the safety of the drawer tray when it is withdrawn.4. Light-duty drawer mold racks are loaded at 800-1000kg/layer. The heavy-duty drawer type rack is loaded in: 800～3000kg/layer.5. Drawer racks occupies a small area, large layers, detailed classification and simple operation.6. Drawer racks can also be used as drawer trays on the beams of cargo racks, which saves costs and makes the structure more stable.

Loft racking systems usually use medium-sized racks or heavy-duty racks as the main support and floor panels to build two or three-story lofts. According to the summary of Suzhou Cored racking, loft racks are widely used in higher warehouses and smaller goods. , In the case of manual access and large storage capacity, the space can be fully utilized and the warehouse area can be saved.Attic shelf characteristics1. Fully assembled structure, convenient and flexible to combine, install and disassemble at will.2. The material cross-section of the column, main beam and auxiliary beam is optimized, and the bearing capacity is strong.3. The surface is treated with electrostatic powder spraying, and the appearance is beautiful.4. According to actual site needs, it can be flexibly designed as a two-story or multi-story building.5. It is suitable for storing many kinds of goods and small batches of goods, making full use of space.6. The lower layer is in the form of shelves, and the upper layer can be a platform or a shelf structure.7. The bottom shelf can store materials and support the floor, which is extremely flexible.