Blog

The most simple and effective diversified storage rack, suitable for placing goods on pallets and storing them in conjunction with forklifts. Storage racks are flexible and quick to store and store, with strong selectivity, storage racks can be first in, first out, and the turnover rate is high. 1000-5000KG/layer storage rack specifications can be customized according to different spaces and goods.Structural characteristics of storage shelves1. The storage racks are fully combined structure, easy to disassemble and assemble, and flexible in application.2. The storage rack column has an adjustable hole spacing of 75mm, and the distance between layers can be flexibly adjusted according to the height of the goods.3. Storage shelf load: 1000-5000KG/layer. Storage rack specifications can be tailored to different spaces and goods.4. Common specifications of storage shelves: L2700*D1000L2300*D1000L2700*D800L2700*D9005. Material of storage shelves: steel6. Material packaging of storage shelves: stretch film or bubble bag packaging

The shuttle racking system is a complete high-density storage system composed of shuttle trolleys and forklifts. This high-efficiency and high-security warehouse space utilization rate brings a brand new choice. ApplicationsIt is suitable for cold storage operations in industries with large quantities of small samples, large batches of single varieties, such as food, beverages, chemicals, tobacco, etc., and relatively single items; reduce low temperature operation time, improve work efficiency, and safety deadline management; strict requirements for batches of goods , Warehouses that need first-in, first-out operation management to increase storage capacity: storage space is limited, and warehouses that need to maximize the use of space. Features1. High-density storage, high warehouse utilization2. High work efficiency, greatly reducing the waiting time of work3. Flexible operation mode, the storage and retrieval mode of goods can also be first in, first out4. Good safety, reduce shelf collision and improve safety and productivity.

There are many advantages of cantilever racks, specifically including several aspects:The structure is simple, neither occupying space nor occupying a place, which determines that no matter how small the shelf is, it can be hung up without falling down.Second, the splicing location design can be hung on the wall or on the ground. Different shelves are designed according to the size of the shelves.Third, the firmness of the cantilever, the splicing structure on the cantilever, the position of small parts are fixed, and they are firmly fixed on the wall, not easy to break.Fourth, reliability. The material on the cantilever is not easy to be artificially reversed, and it is safe and reliable.Fifth, the service life, although the weight on the cantilever is affected, the material with a slightly larger mass may be deformed, and it is guaranteed that there will be no problems when stored for 12 years.

1. Normally, the goods are stored on the shelf after being assembled through pallets, storage cages and other unit container equipment. The load of each unit is generally within 4000kg, and each layer usually puts two units. The shelves can be used alone, or can be arranged freely in the form of main and auxiliary shelves.2. The column pieces of the heavy-duty rack are connected by uprights, cross braces, and diagonal braces with bolts; the column pieces are inserted into the P-type closed beam to form the shelf frame, which is fixed by safety pins, and the structure is simple and reliable; the steel laminate is placed on the cross beam Form the shelf as a whole. Each layer can be adjusted freely up and down in steps of 50mm.3. Heavy-duty racks can determine the layer load requirements according to the size of the beam, the thickness of the laminate, and the number of stiffeners. When the relative length and material selection requirements are met, the maximum layer load can reach 2500kg/layer.4. The laminates can be strip steel laminates or wood laminates, which have strong bearing capacity, wear resistance, simple replacement and low cost.5. In general, the height of the heavy-duty racks should not exceed 12 meters, and attic racks can be built on the basis of the racks.6. The unit shelf span is generally within 4m, the depth is within 1.5m, the shelf height of low and high warehouses is generally within 12m, and the shelf height of super-high warehouses is generally within 30m (such warehouses are basically automated warehouses, and the total shelf height is determined by Several sections of uprights within 12m).7. Use mechanical handling equipment for storage operations. (Balanced forklift, reach forklift, stacker.)8. It is one of the most common and widely used shelves, suitable for most warehouses or product goods.9. It has the feature of 100% random picking of goods. Handling machinery such as forklifts can reach any cargo location for storage operations, and storage operations are convenient and fast!

Heavy-duty beam type racking is the most common type of racking in various storage racking systems; the fully assembled structure in the form of column pieces + beams has a concise and effective structure. The most simple and effective diversified storage rack, working with forklifts, and using convenient pallet access methods, suitable for storing all kinds of goods. The high turnover rate is the shelf widely used by many enterprises.The heavy-duty shelves are all made of high-quality steel, with stable quality. The accessories are connected by hanging pieces, which is convenient for assembly. The beam is adjustable and can be used with a variety of accessories.Load: 800～4000KG/layer. Shelf specifications can be customized according to different spaces and goods.Features1. Normally, the goods are stored on the shelf after being assembled through pallets, storage cages and other unit container equipment;2. It is one of the most common and widely used shelves, suitable for most warehouses or product goods;3. With 100% random picking characteristics of goods. Handling machinery such as forklifts can reach any cargo location for storage operations, and storage operations are convenient and fast;4. Use mechanical handling equipment for storage operations.Customer exampleHeavy-duty racks are widely used in manufacturing, e-commerce warehousing, third-party logistics and distribution centers, etc., which are suitable for many types of small-batch items, as well as small-variety and high-volume items.

1. Normally, the goods are stored on the shelf after being assembled through pallets, storage cages and other unit container equipment. The load of each unit is generally within 4000kg, and each layer usually puts two units. The shelves can be used alone, or can be arranged freely in the form of main and auxiliary shelves.2. The column pieces of the heavy-duty rack are connected by uprights, cross braces, and diagonal braces with bolts; the column pieces are inserted into the P-shaped closed beam to form the shelf frame, which is fixed by safety pins, and the structure is simple and reliable; the steel layer plate is placed on the cross beam Form the shelf as a whole. Each layer can be adjusted freely up and down in steps of 50mm.3. Heavy-duty racks can determine the layer load requirements according to the size of the beam, the thickness of the laminate, and the number of stiffeners. When the relative length and material selection requirements are met, the maximum layer load can reach 2500kg/layer.4. Laminates can be strip steel laminates or wood laminates, which have strong bearing capacity, wear resistance, simple replacement and low cost.5. Heavy-duty shelves generally, the height of the column should not exceed 12 meters, and attic shelves can be built on the basis of the shelves.6. The unit shelf span is generally within 4m, the depth is within 1.5m, the shelf height of low and high warehouses is generally within 12m, and the shelf height of super-high warehouses is generally within 30m (such warehouses are basically automated warehouses, and the total shelf height is determined by Several sections of uprights within 12m).7. Use mechanical handling equipment for storage operations. (Balanced forklift, reach forklift, stacker.)8. It is one of the most common and widely used shelves, suitable for most warehouses or product goods.9. It has the feature of 100% random picking of goods. Handling machinery such as forklifts can reach any cargo location for storage operations, and storage operations are convenient and fast!

1. Roller-type aluminum alloy or sheet metal flow bars are set between the front and rear beams of each layer of the shelf2. The load capacity of each layer of the unit shelf is usually within 1000kg, and the height of the shelf is within 2.5 meters.3. It is suitable for the process conversion on both sides of the assembly line, the picking operation of the distribution center, etc. It can be equipped with electronic tags to realize the information management of the goods4. the U-shaped groove of the fluent strip is made of steel plate, with a bearing capacity of 6kg/shaft, and can work normally at a low temperature of -40°C.5. The roller is made of high-quality thermoplastics, with a very small friction coefficient, excellent impact resistance, strong and not fragile, it has good acid and alkali resistance, and does not absorb moisture.6. The load capacity of each layer of the unit rack is usually within 1000kg, and the height of the shelf is within 2.5 meters.7.The U-shaped groove of the fluent strip is made of steel plate, with a bearing capacity of 6kg/shaft, and can work normally at a low temperature of -40°C.8. The front rail, rear rail, and side panels are all made by bending steel plates. The front rail and rear rail ensure that the goods can block the goods from the shelf under the action of gravity, and the side panels can allow the goods to slide down freely.

Cantilever racks belong to the category of storage racks. They use special profile columns and high-strength cantilevers. They are suitable for storing various long materials, ring materials, plates and irregular materials. The forward cantilever can be single-sided or double-sided. It has the characteristics of light structure and good load capacity. The single arm can load up to 1000kg. The specially reinforced column structure can withstand the pressure of 2000~3000kg. The back pull design increases the overall stability of the shelf, easy to install, and complete accessories. Combined structure, special profile column, designed back pull to increase stability, equipped with high-strength cantilever (arm can be single-sided or double-sided), with light structure, good load capacity, and high space utilization; after adding a shelf, special It is suitable for warehouses with small space and low height. It is easy to manage and has a wide view. Compared with ordinary shelf racks, it has a higher utilization rate. According to the carrying capacity, it can be divided into three types: lightweight, medium and heavy.1. Use square tube production: according to the corresponding cantilever layer load requirements, first select the square tube that meets the layer load requirements, cut it to the required size, weld the anti-skid guard plate at one end, and weld the U-shaped column connector at the other end. Made.2. Made of C-shaped steel: According to the corresponding cantilever layer load requirements, the cantilever rack first selects the specifications of the C-shaped steel, and after the selection, two pieces of C-shaped steel are butt welded, and after welding, one end is welded with a non-slip protective plate, and the other end is welded Connect the U-shaped column connector.The column pieces of the cantilever rack are connected by connecting rods, and the connecting rods are generally made of rectangular tubes. In order to increase safety and stability, a flat iron back pull on the connecting rod requires a special puller to tightly fix the column.3. All the cantilever shelf components are semi-finished products after the production is completed, and will be sprayed in the last process. Before spraying, perform shot blasting to remove oil and rust, and then spray. Pack and ship after completion.Scope of applicationSuitable for storing long materials, ring materials, plates, pipes and irregular goods.The cantilever can be single-sided or double-sided. The cantilever rack has the characteristics of stable structure, good load capacity, and high space utilization.Cantilever shelves are mostly used in the machinery manufacturing industry and building materials supermarkets. After the shelf is added, it is especially suitable for warehouses with small space and low height. It is easy to manage, has a wide view, and has a higher utilization rate than ordinary shelves. The cantilever rack is made by installing an outer cantilever on the traditional rack pillar. It is a special rack for long objects.

Attic shelf is a simple shelf that makes full use of the upper floor space of the warehouse. Build an intermediate loft on the existing shelf or work site to increase the storage area. Generally, light foam and small and medium-sized goods or goods with a long storage period can be placed on the attic floor. The goods can be lifted by forklifts, conveyor belts, hoists, electric hoists or lifting platforms. Generally, light trolleys or pallet traction trolleys are used in the attic.Attic racking systems, usually use medium-sized or heavy-duty racks as the main support plus floor panels (decide which rack to choose according to the total load weight of the rack unit). Floor panels usually use cold rolled steel floor slabs and pattern steel floor slabs. Or steel grille floor. In recent years, cold-rolled steel floor slabs have been used more. It has the advantages of strong bearing capacity, good integrity, good bearing uniformity, high precision, smooth surface, and easy locking. There are many types to choose from, and it is easy to match the lighting system. It is more convenient to fetch and manage. The load capacity of each layer of the unit shelf is usually within 500kg, the floor spacing is usually 2.2m~2.7m, and the height of the top shelf is generally about 2m, which fully considers the convenience of the staff.The floor design is customized according to various installation conditions and can be easily assembled on site without welding. Attic shelf systems have many applications in the field of auto parts, auto 4S shops, light industry, electronics and other industries.

Heavy-duty racks are racks with a height of more than 5 meters. It is the most common shelf used in warehouses. The shelf itself has good picking efficiency and can realize the rapid entry of goods. The main components such as the columns, beams and beams of the heavy-duty racks are made of high-quality Q235 steel. The connection consists of a combination of columns and beams. It is usually used with forklifts.1. The structure is simple, strong and durable, safe and reliable, and can be adjusted freely. Widely used in storage mode, pallet storage, forklift access.2. The columns of heavy-duty racks are composed of column pieces, horizontal braces, diagonal braces, and so on. The diagonal brace is fixed by bolts and secured by safety pins for easy installation.3. The shelf can determine the layering requirements and the size of the column, has a strong load-bearing capacity, strong impact resistance, and the maximum load capacity of each layer can reach 5000kg.4. It can effectively increase the storage height of the warehouse, improve the space utilization rate of the warehouse, and is suitable for the storage of various commodities.5. Foot protection can be added to the bottom of the heavy shelf, and the anti-collision bar can prevent the forklift from colliding. 

Features of medium-sized shelves:1. Fully assembled structure, any combination, convenient and quick to install and disassemble.2. The pillar is a fabricated structure. The beams and columns are connected by steel buckles, and safety bolts are set to prevent falling.3. Optimization of the cross-section of shelf data, selection of various pipe materials, and positive bearing capacity.4. The column 75mm is equipped with adjusting hole spacing, which can be adjusted according to the unevenness of the goods.5. Adjacent columns in the backrest direction can be connected by spacers to strengthen the connection, and the bottom can be used in conjunction with the ground to ensure safety and reliability.6. It is suitable for general manual or stacker delivery, and is widely used in shopping malls, supermarkets, corporate warehouses, and institutions.

Application scope of cantilever rack:It is suitable for storing long materials, ring materials, plates, pipes and irregular goods.Cantilever shelves can be single-sided or double-sided. Cantilever shelves have the characteristics of stable structure, good carrying capacity, and high space utilization.Cantilever shelves are mainly used in machinery manufacturing and construction material supermarkets. After shelves are added, they are especially suitable for warehouses with small space and low height. It is easier to manage than ordinary shelves, has a wider field of vision, and has a higher utilization rate. The cantilever shelf is composed of the cantilever on the traditional shelf pillar, and is a shelf for long objects.1. The cantilever rack series are all combined, disassembled, transported, transported, adjusted, and exercised, which is simple, convenient, safe and reliable.2. With adjustable columns, the spacing of the partitions can be adjusted according to actual needs, and the partitions can be increased or decreased3. It can fully improve space utilization, standardize and standardize warehouse material management, equipped with stackers or forklifts, improve logistics efficiency, reduce freight usage, increase economic efficiency, and improve mechanization. The level of material circulation. Reduce labor intensity and improve working conditions4. The length of the cantilever shelf can be freely combined according to the site conditions