Blog

The beam type rack is safe and convenient, suitable for all kinds of warehouses, and direct access to goods. It is the simplest and most widely used shelf. Can make full use of space. The convenient pallet access method is used to effectively coordinate with forklift loading and unloading, which greatly improves work efficiency. Mechanical equipment requirements: anti-balance forklift or stacker. The stacker can increase the utilization rate of the ground space by 30%, and the operating height is more than 16 meters;The characteristic of the beam type shelf: smooth inventory turnover. Can provide 100% selection ability. Improve the average pickup rate. Provide high-quality product protection. Because the beam type rack is suitable for the storage of goods with many varieties and large batches, in order to facilitate access, there will be more roadways designed, so the ground utilization rate is relatively low.

1. The cantilever racking series adopt the methods of combination, disassembly, transportation, adjustment, movement, etc., which are simple, convenient, safe and reliable. 2. Adopt adjustable column, adjust the spacing between partitions according to actual needs, increase or decrease partitions.3. It can fully improve the space utilization rate, standardized warehouse material management, and cooperate with stackers or forklifts to improve material recycling efficiency and reduce storage. Freight costs and improved economic benefits can increase the level of mechanization of logistics, reduce labor intensity, and improve working conditions.4. The length of the cantilever shelf can be freely combined according to the site conditions. 

1. The three-dimensional structure can make full use of the warehouse space, improve the utilization rate of the warehouse capacity, and expand the warehouse storage capacity;2. Convenient access to goods, first-in-first-out, 100% selection capability, and smooth inventory turnover;3. The goods in the warehouse shelves are clear at a glance, which is convenient for very important management tasks such as inventory, division and measurement;4. To meet the needs of storage and centralized management of large quantities of goods and a wide variety of goods, with mechanical handling tools, it can also achieve orderly storage and handling;5. The goods stored in the shelf are not squeezed each other, and the material loss is small, which can completely guarantee the function of the material itself and reduce the possible loss of the goods in the storage process;6. To ensure the quality of stored goods, measures such as moisture-proof, dust-proof, anti-theft and anti-vandalism can be taken to improve the quality of material storage;7. To meet the management needs of modern enterprises' low-cost, low-loss and high-efficiency logistics supply chain.8. Large bearing capacity, not easy to deform, reliable connection, easy disassembly and assembly, diversification,Therefore, storage shelves play a huge role in the development of modern industry. With the development of modern industrial civilization, the structure and functions of storage shelves are constantly improving.

Warehouse racks are storage, and packaging, transportation, loading and unloading, classification, and information management are the basic functions of logistics. With the development of warehouse shelves, more and more industries and companies enter the warehousing industry. Shelves are one of the main facilities of warehousing, and shelves are an indispensable part of modern industrial warehouses, logistics centers and distribution centers.Warehouse shelves usually have three main accessories: columns, beams, and laminates. This refers to heavy, medium, and light shelves, such as overweight, attic shelves, and accessories that are often used for columns and beams. 1. The three-dimensional structure can make full use of warehouse space, improve warehouse capacity utilization, and expand storage capacity. 2. This product is easy to access, can realize first-in-first-out, 100% selection ability, stable inventory turnover; 3. The goods on the warehouse shelves are clear at a glance, which is convenient for very important management tasks such as inventory, management and measurement; 4. In order to meet the needs of a large number of goods, the use of mechanical loading and unloading tools for a variety of storage and centralized management can also achieve orderly storage and loading and unloading; 5. The goods stored on the shelf do not squeeze each other, the material loss is small, the function of the material itself is fully guaranteed, and the loss of the goods in the storage link is reduced. 6. In order to ensure the quality of stored goods, we can take measures such as moisture-proof, dust-proof, anti-theft, and loss-proof to improve the storage quality of materials; 7. To meet the logistics supply chain management needs of modern enterprises with low cost, low loss and high efficiency. 8. High durability, not easy to deform, reliable connection, convenient disassembly and assembly, and a wide variety.

Product features and applicationsIt is suitable for storing small quantities of goods, batch operations and small selectivity goods. The goods are stored on the support rails one by one in the depth direction on pallets, which increases the storage density and space utilization. The forklift can directly drive into the tunnel to retrieve and retrieve the goods, which is extremely convenient.Drive-in shelf recommendations1. Based on the consideration that the pallet is suspended for carrying goods, it is recommended to use double-sided pallets2. pay attention to whether the forklift top guard can smoothly pass between the two corbels of the shelf3. In order to facilitate the import and export, the goods on the pallet should not exceed the edge of the pallet as much as possible4. Reach forklift or counterbalanced forklift can be used.5. suitable for each board of cargo within 2000KG

The most simple and effective diversified storage rack, suitable for placing goods on pallets and storing them in conjunction with forklifts. Storage racks are flexible and quick to store and store, with strong selectivity, storage racks can be first in, first out, and the turnover rate is high. 1000-5000KG/layer storage rack specifications can be customized according to different spaces and goods.Structural characteristics of storage shelves1. The storage racks are fully combined structure, easy to disassemble and assemble, and flexible in application.2. The storage rack column has an adjustable hole spacing of 75mm, and the distance between layers can be flexibly adjusted according to the height of the goods.3. Storage shelf load: 1000-5000KG/layer. Storage rack specifications can be tailored to different spaces and goods.4. Common specifications of storage shelves: L2700*D1000L2300*D1000L2700*D800L2700*D9005. Material of storage shelves: steel6. Material packaging of storage shelves: stretch film or bubble bag packaging

The shuttle racking system is a complete high-density storage system composed of shuttle trolleys and forklifts. This high-efficiency and high-security warehouse space utilization rate brings a brand new choice. ApplicationsIt is suitable for cold storage operations in industries with large quantities of small samples, large batches of single varieties, such as food, beverages, chemicals, tobacco, etc., and relatively single items; reduce low temperature operation time, improve work efficiency, and safety deadline management; strict requirements for batches of goods , Warehouses that need first-in, first-out operation management to increase storage capacity: storage space is limited, and warehouses that need to maximize the use of space. Features1. High-density storage, high warehouse utilization2. High work efficiency, greatly reducing the waiting time of work3. Flexible operation mode, the storage and retrieval mode of goods can also be first in, first out4. Good safety, reduce shelf collision and improve safety and productivity.

There are many advantages of cantilever racks, specifically including several aspects:The structure is simple, neither occupying space nor occupying a place, which determines that no matter how small the shelf is, it can be hung up without falling down.Second, the splicing location design can be hung on the wall or on the ground. Different shelves are designed according to the size of the shelves.Third, the firmness of the cantilever, the splicing structure on the cantilever, the position of small parts are fixed, and they are firmly fixed on the wall, not easy to break.Fourth, reliability. The material on the cantilever is not easy to be artificially reversed, and it is safe and reliable.Fifth, the service life, although the weight on the cantilever is affected, the material with a slightly larger mass may be deformed, and it is guaranteed that there will be no problems when stored for 12 years.

1. Normally, the goods are stored on the shelf after being assembled through pallets, storage cages and other unit container equipment. The load of each unit is generally within 4000kg, and each layer usually puts two units. The shelves can be used alone, or can be arranged freely in the form of main and auxiliary shelves.2. The column pieces of the heavy-duty rack are connected by uprights, cross braces, and diagonal braces with bolts; the column pieces are inserted into the P-type closed beam to form the shelf frame, which is fixed by safety pins, and the structure is simple and reliable; the steel laminate is placed on the cross beam Form the shelf as a whole. Each layer can be adjusted freely up and down in steps of 50mm.3. Heavy-duty racks can determine the layer load requirements according to the size of the beam, the thickness of the laminate, and the number of stiffeners. When the relative length and material selection requirements are met, the maximum layer load can reach 2500kg/layer.4. The laminates can be strip steel laminates or wood laminates, which have strong bearing capacity, wear resistance, simple replacement and low cost.5. In general, the height of the heavy-duty racks should not exceed 12 meters, and attic racks can be built on the basis of the racks.6. The unit shelf span is generally within 4m, the depth is within 1.5m, the shelf height of low and high warehouses is generally within 12m, and the shelf height of super-high warehouses is generally within 30m (such warehouses are basically automated warehouses, and the total shelf height is determined by Several sections of uprights within 12m).7. Use mechanical handling equipment for storage operations. (Balanced forklift, reach forklift, stacker.)8. It is one of the most common and widely used shelves, suitable for most warehouses or product goods.9. It has the feature of 100% random picking of goods. Handling machinery such as forklifts can reach any cargo location for storage operations, and storage operations are convenient and fast!

Heavy-duty beam type racking is the most common type of racking in various storage racking systems; the fully assembled structure in the form of column pieces + beams has a concise and effective structure. The most simple and effective diversified storage rack, working with forklifts, and using convenient pallet access methods, suitable for storing all kinds of goods. The high turnover rate is the shelf widely used by many enterprises.The heavy-duty shelves are all made of high-quality steel, with stable quality. The accessories are connected by hanging pieces, which is convenient for assembly. The beam is adjustable and can be used with a variety of accessories.Load: 800～4000KG/layer. Shelf specifications can be customized according to different spaces and goods.Features1. Normally, the goods are stored on the shelf after being assembled through pallets, storage cages and other unit container equipment;2. It is one of the most common and widely used shelves, suitable for most warehouses or product goods;3. With 100% random picking characteristics of goods. Handling machinery such as forklifts can reach any cargo location for storage operations, and storage operations are convenient and fast;4. Use mechanical handling equipment for storage operations.Customer exampleHeavy-duty racks are widely used in manufacturing, e-commerce warehousing, third-party logistics and distribution centers, etc., which are suitable for many types of small-batch items, as well as small-variety and high-volume items.

1. Normally, the goods are stored on the shelf after being assembled through pallets, storage cages and other unit container equipment. The load of each unit is generally within 4000kg, and each layer usually puts two units. The shelves can be used alone, or can be arranged freely in the form of main and auxiliary shelves.2. The column pieces of the heavy-duty rack are connected by uprights, cross braces, and diagonal braces with bolts; the column pieces are inserted into the P-shaped closed beam to form the shelf frame, which is fixed by safety pins, and the structure is simple and reliable; the steel layer plate is placed on the cross beam Form the shelf as a whole. Each layer can be adjusted freely up and down in steps of 50mm.3. Heavy-duty racks can determine the layer load requirements according to the size of the beam, the thickness of the laminate, and the number of stiffeners. When the relative length and material selection requirements are met, the maximum layer load can reach 2500kg/layer.4. Laminates can be strip steel laminates or wood laminates, which have strong bearing capacity, wear resistance, simple replacement and low cost.5. Heavy-duty shelves generally, the height of the column should not exceed 12 meters, and attic shelves can be built on the basis of the shelves.6. The unit shelf span is generally within 4m, the depth is within 1.5m, the shelf height of low and high warehouses is generally within 12m, and the shelf height of super-high warehouses is generally within 30m (such warehouses are basically automated warehouses, and the total shelf height is determined by Several sections of uprights within 12m).7. Use mechanical handling equipment for storage operations. (Balanced forklift, reach forklift, stacker.)8. It is one of the most common and widely used shelves, suitable for most warehouses or product goods.9. It has the feature of 100% random picking of goods. Handling machinery such as forklifts can reach any cargo location for storage operations, and storage operations are convenient and fast!

1. Roller-type aluminum alloy or sheet metal flow bars are set between the front and rear beams of each layer of the shelf2. The load capacity of each layer of the unit shelf is usually within 1000kg, and the height of the shelf is within 2.5 meters.3. It is suitable for the process conversion on both sides of the assembly line, the picking operation of the distribution center, etc. It can be equipped with electronic tags to realize the information management of the goods4. the U-shaped groove of the fluent strip is made of steel plate, with a bearing capacity of 6kg/shaft, and can work normally at a low temperature of -40°C.5. The roller is made of high-quality thermoplastics, with a very small friction coefficient, excellent impact resistance, strong and not fragile, it has good acid and alkali resistance, and does not absorb moisture.6. The load capacity of each layer of the unit rack is usually within 1000kg, and the height of the shelf is within 2.5 meters.7.The U-shaped groove of the fluent strip is made of steel plate, with a bearing capacity of 6kg/shaft, and can work normally at a low temperature of -40°C.8. The front rail, rear rail, and side panels are all made by bending steel plates. The front rail and rear rail ensure that the goods can block the goods from the shelf under the action of gravity, and the side panels can allow the goods to slide down freely.