Blog

1. To achieve the highest density storage of pallet cargo, significantly reduce the cost of construction of the warehouse.2. The goods are first-in-first-out, first-in-last-out optional.3. Remote control operation, no need to enter the racking, high efficiency.4. Anti-seismic performance is much higher than the drive in rack.5. Compared with drive-in racks, press-in racks and gravity racks, the overall cost is lower.6. The structure of the shelf is reasonable and stable.7. Shelf can be designed with large depth and storage density.8. Under the same conditions, there are many types of forklifts.9. Optional features, easy to operate.10. The shuttle car has certain requirements for the unitized packaging of the goods.11. At this stage, shuttle buses have higher costs and different standards.

Mezzanine flooring systems are simple shelves that make full use of the upper space of the warehouse. Construct an intermediate loft on an existing shelf or work site to increase storage area. The attic floor can generally be used for light foaming and small or medium-sized goods or long-term storage. The forklift, conveyor belt, hoist, electric hoist or lifting platform can be used to lift the cargo. In the attic, light trolleys or pallet tractors are generally used.Warehouse mezzanine rack is to build an intermediate loft on the existing work site or shelf to increase the storage space. It can be used as a second and third floor loft. It is suitable to access some light foam and small and medium-sized goods. It is suitable for multi-variety or large quantities. Multi-variety small batches of goods, manual access to goods. Goods are usually sent to the second and third floors by forklifts, hydraulic lifts or freight elevators, and then sent to a certain location by light trolleys or hydraulic pallet trucks. Applicable to the case of high warehouse, small cargo, manual access, and large storage.

  Wood fruit and vegetable rack  The whole wood fruit and vegetable rack is usually pine or fir, and the wood board is connected by silk. The whole wooden material fruit and vegetable rack has a generous appearance and good display effect. It is suitable for grain storage display, dry goods display and fruit display. The disadvantage is that the wood is not suitable for later maintenance. It is carried out, and the mobile assembly is more complicated, and it is suitable for use in places where supermarkets, shopping malls, etc. are not frequently adjusted;    Steel and wood combined fruit rackThe rack is based on an all-wood and Steel frame, and the support structure is welded or screwed using a high-quality square tube structure or angle iron. The fruit and vegetable display basket is made of wood, and the steel-wood combined fruit and vegetable rack has the advantage that the support structure is made of steel, the steel structure is simple, the disassembly and assembly is convenient, and the utility model is durable and convenient for transportation.    Steel fruit and vegetable rack   The steel fruit and vegetable rack adopts the square tube welded structure, the frame split structure, and can be freely assembled, and the fruit display basket is made of high quality plastic. The advantages of the steel fruit and vegetable rack are that the structure is simple, the transportation is convenient, and the fruit display effect is good, because the steel structure can be considered to adopt a multi-layer display and a bottom storage form to maximize the effect of the store display. The fruit basket has a breathable structure, which is conducive to the breathability of the fruit and increases the fruit shelf period.

   Heavy-duty shelves are used in various industries, with low cost, safe and reliable, simple assembly and disassembly, and can be used alone or in the form of main and auxiliary frames.  The column of the heavy-duty shelf is made up of bolts by the column, the cross bracing and the diagonal bracing; the column piece and the P-shaped closed beam are connected to form a shelf frame, which is fixed by a safety pin, and the structure is simple and reliable; the steel layer is tied to the beam Form the shelf as a whole. Each layer can be adjusted freely up and down by 75mm steps.  The column of the heavy-duty shelf is made up of bolts by the column, the cross bracing and the diagonal bracing; the column piece and the P-shaped closed beam are inserted into the shelf frame to form a shelf frame, which is fixed by a safety pin, and the structure is simple and reliable; the steel layer plate is tied to the beam Form the shelf as a whole. Each layer can be adjusted freely up and down by 75mm steps.  The column of the heavy-duty shelf is made of bolts by the column, the cross bracing and the diagonal bracing; the column piece and the P-shaped closed beam are connected to form a shelf frame, which is fixed by a safety pin, and the structure is simple and reliable; the steel layer is tied to the beam Form the shelf as a whole. Each layer can be adjusted freely up and down by 75mm steps.

  Warehouse rack has large bearing capacity, is not easy to deform, reliable connection, easy to assemble and disassemble  Three-dimensional structure, can make full use of warehouse space, improve warehouse capacity utilization, and expand warehouse storage capacity;  Convenient access to goods, can achieve first-in-first-out, 100% selection ability, smooth inventory turnover;   The goods in the warehouse shelves are clear at a glance, which is convenient for inventory, division, measurement and other important management tasks;   To meet the needs of large-volume goods, a wide variety of storage and centralized management, and with the mechanical handling tools, the same order of storage and handling can be done;   The goods stored in the shelves are not squeezed out of each other, and the loss of materials is small, which can completely guarantee the function of the capital body and reduce the possible losses of the goods in the storage link;   To ensure the quality of stored goods, measures such as moisture, dust, burglary and vandalism can be taken to improve the quality of material storage;  To meet the management needs of modern enterprises with low cost, low loss and high efficiency logistics supply chain.

In traditional shelf arrangements, land occupation has been limited. Using mobile shelves can maximize the problem of insufficient warehouse space. It is especially suitable for the design and use of core raw materials and semi-finished warehouses. It is also suitable for the design of pet food and premix production enterprises in finished products and raw materials warehouses.Mobile shelves are easy to control, safe and reliable. Each row of shelves has a motor drive that is moved by a roller mounted under the shelf along a track laid on the ground. The outstanding advantage is that the space utilization rate is improved. One set of shelves only needs one channel, and one channel of the fixed type pallet shelf only serves two rows of shelves on both sides of the channel. Therefore, in the same space, the storage capacity of mobile shelves is much higher than that of general fixed shelves.

1. Heavy-duty shelves are used in various industries, with low cost, safe and reliable, simple assembly and disassembly, and can be used alone or in the form of main and auxiliary frames.2. The column of the heavy-duty shelf is made of bolts by the column, the cross bracing and the diagonal bracing; the column piece and the P-shaped closed beam are connected to form a shelf frame, which is fixed by a safety pin, and the structure is simple and reliable; the steel layer plate is placed on the beam. The storage shelves are formed as a whole. Each layer can be adjusted freely up and down by 75mm steps.3. Heavy-duty shelves can be related to the size of the beam, the thickness of the laminate, the number of reinforcing ribs determines the layer loading requirements, in the case of the relative length and material selection requirements, each layer can bear up to 2500kg / layer.4. Heavy storage shelves Under normal circumstances, the height of the column does not exceed 12 meters.

Drive through rack are also known as corridor-style shelves or drive-in shelves. The through-type shelf is also called a straight-in shelf, and is composed of a column, a shelf beam, a diagonal pull, a guide rail, a foot protector, and a back pull.This shelf has two attributes:First: The forklift can directly enter the shelf area, suitable for storing large quantities and small varieties of goods, and the space utilization rate is extremely high;Second: the goods can be stored and removed from one side, or can be selected according to the principle of selection. The goods are stored on one side and taken out from the other side, which is especially suitable for the storage of standard cargo units. The through-shelf adopts the tray access mode, which is suitable for the storage of large types of goods in a small variety. In addition to the cargo space near the passageway, the through-shelf is required to enter the shelf to access the cargo. Usually, the single-side pickup is recommended to be no more than 7 cargo depths. In order to improve the running speed of the forklift, the guide rail can be selected according to actual needs. Compared with the cargo-type shelf, the utilization of the storage space of the through-type shelf can be increased by more than 30%, and the through-type shelf is widely used in cold storage and food and tobacco industries.  

Plant structureThe effective height of the beam should be considered when selecting the shelf for the storage device to determine the shelf height. The position of the beam and column will affect the configuration of the shelf. The strength and the flatness of the floor are also related to the design and installation of the shelves. In addition, the installation location of fire protection facilities and lighting facilities must be considered.Item characteristicsThe shape and size of the stored items are directly related to the selection of the shelf specifications. The weight of the stored items directly affects the strength of the shelf.AccessibilityGeneral accessibility and storage density are relative. With a higher storage density, the accessibility of the item is poor.Handling equipmentThe access operation of the storage device is done by the handling device. Therefore, the selection of storage equipment requires consideration of handling equipment. The stacker is a general-purpose handling device, and the shelf channel width directly affects the selection type of the stacker. It is a counterweight or a narrow channel.Inbound and outbound volumeAlthough some shelves have a good storage density, but the amount of storage and delivery is not high, suitable for low-frequency operations. The high volume of inbound and outbound storage is very important data, which is an important consideration in the choice of shelf form.

The material of the shelf is generally cold-rolled steel , preferably the national standard, but there are few manufacturers using the national standard. The easiest way is to follow an agreement with the two parties to carry out an experiment. The structure of the shelf, the shelf column should see if the bending of the section is multi-uniform and uniform, and the structure of the shelf is about uniform and symmetrical. The beam of the warehouse shelf depends on the hook structure of the beam and the form of the beam hanging to the column: the hook of the beam should be better, and the more the force is better; the hook of the beam should be attached to the column to see if the contact between the hook and the column is close. Consistently, the inside of the hook should be tightly spaced from the side of the column so that the structure is stable and durable.Welding process, it must be seen that the welding joint is even and full, no indirect, no leakage welding.Surface treatment of the storage shelf, the surface of the storage shelf should be evenly sprayed and have strong adhesion. Whether the surface of the shelf is evenly sprayed depends on whether there is any omission in the inner edge of the shelf column hole, and it can be hard to check. If the material taps easily, it will fall off, indicating that the shelf is easily rusted.

Three-dimensional structure, which can make full use of warehouse space, improve warehouse capacity utilization, and expand warehouse storage capacity;Convenient access to goods, can be first-in, first-out, 100% selection ability, smooth inventory turnover;The goods in the warehouse shelves, at a glance, easy to count, divide, measure and other important management work;To meet the needs of large-volume goods, a wide variety of storage and centralized management, with mechanical handling tools, can also achieve storage and handling work orderly;The goods stored in the shelves are not squeezed by each other, and the loss of materials is small, which can completely guarantee the function of the capital of the object and reduce the loss of the goods in the storage link;To ensure the quality of stored goods, you can take measures such as moisture, dust, anti-theft, anti-destruction, etc., to improve the quality of material storage;Meet the management needs of modern enterprises with low cost, low loss and high efficiency logistics supply chain.Large bearing capacity, not easy to deform, reliable connection, easy to disassemble, diversified.

We all know that materials are one of the most important factors in product manufacturing, and only the right materials can make good products. Especially for storage devices like storage shelves, it is more important. Some people will ask if the better for steel thicker ?Under certain circumstances, the thicker the material, the better its load-bearing performance, but this is not universal. For products such as storage shelves, the steels used are also graded. Different types of steel are suitable for different shelf manufacturing. It is not that the thicker the materials used in all warehouse shelves are, the better.Customized storage shelves are commonly used Q235 steel, but there are many steel models, such as Q345, Q195 and so on. If the Q235 is compared with the Q195, the actual thickness of the former 1.5mm can achieve the same effect as the latter 2.0 thickness. And in general, Q235 material toughness and strength are also relatively good.Customized shelves involve many real-world problems in the operation process. Such as the load bearing required by the shelf, the overall and partial structure of the shelf, how to design and calculate the cargo space, and the influence of the ground in the shelf installation and commissioning. These factors directly affect the choice of steel for storage shelves. Inappropriate choices not only increase their procurement costs, but also cause changes in production for shelf suppliers.Do you think that the thicker the material, the stronger the shelf? We can provide the details to the manufacturer according to their needs when customizing the storage shelves. The manufacturer will give you the solution that suits you.