Blog

Design a reasonable warehouse rack needs to consider that it can make the storage more humanized, more convenient and quicker. Generally need to pay attention to the following factors:The structure of the warehouse. Like the warehouse height of the beam , to determine the height of the shelf. And the strength of the floor, the flatness of the ground, and the location of the fire protection facilities and lighting equipment must be considered.Characteristics of warehouse items. The appearance and size of the stored items is directly related to the size of the rack.Storage and handling equipment. The storage device carries the work processing device to complete. So choose a storage device and consider the mobile device.The amount of storage into and out of the warehouse. Whether it is FIFO, access frequency or access quantity, we must make corresponding adjustment design based on these data for shelf selection.Accessibility of warehouse items. Universal accessibility and storage density are relative. Because the higher the storage density, the accessibility of the shelf is reduced, that is, the lower the selectivity

To make full use of the functions of the supermarket shelves, not only to bring benefits to the supermarket, but also to make the space more rational. The details determine success or failure. When using and caring for supermarket shelves, the following three points are mainly used: Cleaning is essential in the use of supermarket shelves. Only supermarket shelves with a neat appearance can attract consumers. While ensuring clean and tidy, supermarket shelf users should also regularly check the supermarket shelves to ensure that the supermarket shelves are used normally. In general, the average human vision is from 110 degrees to 120 degrees, and the visible width ranges from 1.5 m to 2 m. The angle of view when walking in a shop is 60 degrees, and the visual range is 1 m. Therefore, the merchant should combine the visual habits of the consumers, and when using the supermarket shelves, it is necessary to ensure the product display surface and increase the purchasing probability. The general supermarket shelves have a total of 5 floors, from the top to the third, the fourth, the fifth is the largest sales of shelves, especially the third layer and the consumer's line of sight is basically parallel, reachable, the most convenient for consumers to choose, also sales maximum. Reasonable use and care of supermarket shelves will not only extend the life of supermarket shelves, but also bring more benefits and make the space more reasonable.    

   Light duty storage rack are very economical and convenient. The shelf is composed of three components: a column piece, a beam, and a laminate. The lightweight shelf is designed with a screwless combination, which is convenient and quick to install and disassemble. Suitable for storing some light and small items, it is a kind of laminate shelf. The structure of the light-duty shelf is the same as that of the medium-sized one. It can be dismantled and disassembled at the same time. The height of the layer can be adjusted freely with a pitch of 5cm. However, the material specifications are relatively small and the bearing capacity is relatively small. The light-weight shelf is relatively economical and the structure is relatively versatile. The shelf should be stable. It can carry 100-200kg in the span of 1500cm. The surface is spray-treated, which is beautiful and neat. Suitable for storage of light and medium-sized items, manual access.  

   Placed in the kitchen, the shelving unit holds anything from canned goods and bulk items to pots and pans, stand mixers, dishes, and bowls. In the living room, the shelving unit beautifully displays books, magazines, board games, and more, while in an office setting, it can help keep files, documents, and supplies neatly organized. For small dorm rooms, the three-shelf shelving unit makes use of available vertical space for keeping clothes, snacks, text books, and more neatly organized and easily accessible. The shelving unit can also be used to help keep garage clutter under control; it works great for heavy cans of paint, toolboxes, gardening supplies, extension cords, and more. The shelving unit quickly provides added shelf space, wherever it's needed most.

First, a person holds the column upright and balances the drawing distance. It can be based on the length of the beam. The other person hold the beam, can be loaded with the bottom layer, and the cards at both ends of the beam are aligned with the card slot at the bottom of the column.  Then use the ground to shoot the beam down until both ends are stuck in, and then install 2,3,4 layers, which can be installed according to the level of use.  The third step, each layer needs to be equipped with two beams. When loading, some holes can be first positioned for positioning, and the left right and the two ends should be balanced at one height. The fourth step, after the beam is installed, the layer can be placed directly on the beam, and the flat pressure can be flattened. The last step, inspection and acceptance, after placing the installed shelves in the designated area, carefully check whether all of them have been installed, and the goods can be placed directly without any problems. As a new type of composite storage system, Mezzanine rack is fully utilizing the advantages of the stereo storage rack and the convenience of nearby inventory under the platform. Moreover, the construction of the racking system makes full use of the warehouse and various possible object support, so that this seemingly relatively complicated storage system can fully utilize its own characteristics to better serve its own warehousing.    

In large shopping malls or commercial pedestrian streets, we can all see the Miniso shelf. Why is it popular with merchants as soon as it is launched, and is loved by consumers?1.simple style, stylish atmospherePeople who often go shopping should know that the famous and excellent products are taking the Japanese-Korean style. In line with the needs of the public, so the reason why the Miniso shelf can get people's respect is mostly because of its simple and fashionable characteristics.2.easy to disassemble, a variety of combinations and waysBecause the famous high-quality shelves are modular shelves, it is easy to install. The whole shelf can be arbitrarily matched, can be hung and can be used for multi-purpose purposes. One person can easily complete the installation, unlike the showcase installation is more troublesome, requiring technicians to install on site.3.environmentally friendly and practical, affordableThe famous high-quality shelf is produced and processed by the surface treatment of high-temperature paint. This process is more environmentally friendly than the paint treatment, and the quality of the paint is also high. The price is much cheaper than the showcase, because the production showcase is more complicated, so the price of the showcase is relatively high.The above three points are the main characteristics of the Miniso shelf, what kind of store is suitable for what kind of display shelves, this depends on how the merchants choose. For more information, please pay attention to the Heda shelf. 

1.The pallet rack has a large span and high load. The span of the pallet rack is mainly determined by the pallet size, and generally one shelf can hold two conventional pallets. If the single pallet is particularly large , only one pallet can be placed per layer.2.The pallet rack structure is stable. Due to the high load bearing requirements of the pallet racks, the stability of the pallet racks. There are also special requirements. The expansion pins of the pallet rack must be installed to ensure the stability of the pallet rack.3.Pallet racks do not require laminates. In general, pallet racks do not require laminates, only span beams are installed on the beams, and two span beams are generally installed per pallet. This will maximize cost savings.4.The number of tray shelves can be customized. The number of layers of the pallet rack can be determined according to the height of the warehouse, the height of each pallet, and the like. The bottom layer can be used without beams, and the tray is placed directly on the ground.5.Pallet type shelf is high in utilization, flexible and convenient to access, supplemented by computer management or control, tray-type shelves can basically meet the requirements of modern logistics system.

 This is our Popular product, Welcome to visit us!!!

The cantilever can be single-sided or double-sided, and the cantilever rack has the characteristics of stable structure, good load capacity and high space utilization. Cargo access is carried out by forklift, driving or manual.The height of the cantilevered shelves is usually within 2.0 meters (up to 6 meters if accessed by a forklift), the length of the cantilever is within 1.5 meters, and the load per arm is usually within 800KG.Cantilever racks are mostly used in the machinery manufacturing industry and building materials supermarkets. After adding the shelf, it is especially suitable for the warehouse with small space and low height. It has convenient management, wide field of vision and higher utilization than ordinary shelves.

Medium duty storage rack have the following functions:Three-dimensional structure, which can make full use of warehouse space, improve warehouse capacity utilization, and expand warehouse storage capacity;  The convenience of cargo access can improve the first-in-first-out, 100% selection ability, and smooth inventory turnover;The goods in the warehouse shelves are clear at a glance, which is convenient for inventory, division, measurement and other important governance work;To meet the needs of large-volume bulk cargo, a wide variety of storage and centralized management, and with the mechanical handling tools, the same order of storage and handling can be achieved; The goods stored in the shelves are not squeezed by each other, the loss of materials is small, the function of the capital body is fully guaranteed, and the possible losses of the goods in the storage link are reduced;To ensure the quality of stored goods, measures such as moisture, dust, burglary and vandalism can be taken to improve the quality of material storage;Meet the governance needs of modern enterprises with low cost, low loss and high efficiency logistics supply chain.The bearing capacity is large, it is not easy to be deformed, the connection is reliable, and the (shelf base network) is easy to disassemble and disassemble. The surface of all shelves is treated by pickling, phosphating, electrostatic spraying, etc., anti-corrosion and anti-rust.         

The drive-in rack is also name through-shelf, which is a full-length continuous rack that uses pallets to automatically store goods. The characteristics of this type of shelf are that the space required for the passage is eliminated, the shelf can be more dense, and the utilization of the warehouse space is improved.     The Drive In Rack are characterized by the goods coming in and out from the same side, which means that the stored products need to meet the "advanced out" so that products that require first-in, first-out are not suitable for use.    The drive-in shelves are simple in structure and do not require a lot of equipment, so the cost of manufacturing this shelf is often lower than other shelves. Because of the special structure, the drive-in rack is more suitable for storing a large number of products with a small variety, and is often used to store large quantities of the same type of product goods.Due to the high storage density of the drive-in shelves and the space utilization of the warehouse, this shelf is more popular with enterprises. More information about the drive-in shelves can be Contact the Heda shelf, where professional technicians can help you solve the problem.

   The attic shelf is made up of medium and heavy bulkhead shelves as the main support, plus the floor panels. Therefore, there will be no welding form at the installation site, and the disassembly is convenient and environmentally friendly. If you need to migrate the venue, it is definitely the best choice. Moreover, it can also make full use of the upper space, which is not comparable to other shelves. Finally, the biggest advantage of the loft-style shelf is that it can be continuously innovated; because of the customer's demand, the bottom needs to hold the weight material, so the bottom is converted into a beam shelf, and the column is used with the attic, so there is no need to worry about whether the attic will shake or not. Problems such as deformation. In addition to the conversion to the beam-type attic combination shelf, we also have other baffle loft-style combination shelves, cantilevered attic combination shelves and other transformation cases.