Blog

   For the simple maintenance of warehouse shelves, generally, the design of  warehouse shelves is relatively simple, so maintenance will be very simple.   The first is the cleaning of the shelves: cleaning is very important for a shelf, because storage shelves are usually placed in the warehouse, and some units of the warehouse are generally few people. Only when you need something, will you rush to get it, and then hurriedly leave. So very few people go to clean the shelves. Frequent cleaning of the shelf will extend the shelf life. The cleaning of the shelf is not necessarily washed with water, as long as there is no dust on it. And washing the shelves with water is easy to oxidize the surface of the shelf, greatly reducing the shelf life.   Then put the shelves neatly: tools, accessories, products should be placed neatly, pipes, lines must be organized to avoid blocking the passage. Moreover, the neatly arranged shelves are not easy to hit, increasing the safety of the shelves and goods!    Finally, it is safety. Be sure to remember the weight of the shelf. Do not put the goods beyond the weight to avoid a safety accident.

The reason for the collapse of the shelf may be that the shelf is hit by the forklift; when the shelf is hit by the forklift, there will always be a large chance of collapse at this time or later due to structural damage or crushing load. What measures can we take to reduce the possibility of collapse?Establish a wide aisle space, although the maximum space utilization is a key goal of any warehouse, but safety is the first. Many companies arrange their racking channels when the forklift manufacturer provides a "minimum" passage for the forklift involved. The minimum may be too narrow, especially for inexperienced drivers. Because the aisle trays are ubiquitous, the width of the tray should be considered on both sides of the aisle. The more spacious channel also allows the driver to work faster in the channel, increasing productivity.Install a crash barrier, which is a cheap and simple way to protect the shelf. The shelves in the corner row are most susceptible to impact by the forklift, so any type of foot guardrail can be used to prevent the shelf from being damaged by the forklift.To increase the speed limit of the forklift, the speed of the forklift should not exceed 8 miles per hour, and the speed near pedestrians should not exceed 3 miles per hour. Low speed operation should also apply to the tray rack area. In the aisle, close to the corner or shelf tunnel should be the "slow walking" area of the forklift.The reason for the collapse of the shelf may be overloadIf the beam is not damaged, there are insurance pins, and a stable tray is attached to them, it should be noted that the load of the beam also needs to be evenly distributed.The load carrying capacity of the beam also depends on the uniform distribution, and if the decorative panels are used instead of placing the pallets flat on the beams, they will also change. Beam loading can be compromised with damaged pallets or high density loads.The reason for the collapse of the shelves may be the poor design of the shelves.Depending on size, weight and density, the rack is typically designed for a specific load. Incorrect design can cause a crash.When designing the shelf structure, factors such as the use requirements, equipment conditions, load properties, material supply and installation conditions should be comprehensively considered, and structural forms, construction measures and materials should be reasonably selected to achieve advanced technology, economical rationality, safety and application, and quality assurance.

Cantilever racks are widely used . What is a cantilever rack? What is the composition and application of the cantilever rack? Guangzhou HEDA Shelves Co., Ltd. will help you answer and choose the good quality cantilever rack for you. Guangzhou HEDA Shelves products are widely used in warehousing and logistics, shopping malls and supermarkets, toy gifts, food and beverage, industrial machinery, hardware and electrical appliances, store display, export trade fairs, household goods and other aspects. Guangzhou HEDA Shelves Co., Ltd. constantly improves the management system, surpasses itself, thinks what customers want, and provides customers with suggestions on overall layout design, shelf placement and so on. Provide complete cargo distribution, shelf installation and other services.What is a cantilever rack? The cantilever rack is composed of a column, a column beam and a cantilever. The column adopts automatic pre-filled rolling double-type C-type special-shaped steel as the column, and 200 and 140 I-beams are used as the bottom beam. The column beam adopts special trapezoidal plate and is connected by high-strength bolts. The cantilever beam is a double inner flanged C-type butt weld. The cantilever beam and the column are connected by a galvanized pin plate. The column sets are connected by connectors. (H-shaped steel or cold-rolled steel is used for the column, and the cantilever is square tube, cold-rolled steel or H-shaped steel. The cantilever and the column are plug-in or bolt-connected, and the base and the column are bolted.) One-arm load can be used Up to 1000kg or more, the specially reinforced column structure can withstand 2000~3000kg pressure. Combined structure, special profile column, designed to increase the stability of the back pull, with high-strength cantilever (arm can be single-sided or double-sided), with a light structure, good load capacity, high space utilization and so on.  

There are many types of supermarket shelves, which can be divided into the following categories according to the size of the supermarket:First, large supermarket shelvesHypermarkets are rich in display, so the requirements for shelf load are higher. Its main customers are hypermarkets customers.Second, medium duty supermarket shelving.The medium duty supermarket shelving is a shelf specially designed for standard supermarkets. The biggest feature is that it is light and beautiful. It does not have the complex types of attachments as large supermarket shelves, and it has also been adjusted in the way of display, paying more attention to the display effect of goods. And humanized display. Its main customers are local chain medium duty supermarkets.Third, convenience store shelvesConvenience store shelves are suitable for convenience stores and drugstores. They are easy to install with a no tool installation concept. The biggest feature of the shelf is exquisite, lightweight, beautiful and professional.Supermarket shelves are mainly divided according to their use in the store:1. single-sided shelves 2. double-sided shelves3. end frame (for both ends of a row of double-sided shelves)With the continuous development of the supermarket industry, in order to meet the display needs of supermarkets, the shelf companies have developed a series of special shelves, such as washing shelves, clothing racks and so on.

1 collision protectionThe most vulnerable parts of the shelf are the passages and the columns at the corners, which are usually deformed by the forklift. According to different shelves, channel widths and transportation tools, there are matching anti-collision columns. The installation of anti-collision columns plays an important role in protecting the shelf columns.2 anti-pressureDifferent sizes of shelves are designed according to load-bearing design. Therefore, the weight of the goods placed on the shelf must be within the weight of the shelf. It is best for the warehouse manager to carry out the load-bearing load-limiting logo on the shelf. The principle of light weight on the bottom of the shelf should be followed, that is, the bottom layer is heavy and the high-rise is light.3 Moisture proof, sun protection, rain protection.Although the shelves and beams are all metal products, and the surface is painted or sprayed, after being exposed to the sun, it may rust over time and affect the service life.

The attic platform is a simple shelf that utilizes the upper space of the warehouse. It is to build an intermediate loft on the existing shelf or work site to increase the storage area. The attic floor can generally store small and medium-sized goods, then forklifts, conveyor belts, hoists, electric The hoist or lifting platform can be used to lift the cargo. What are the functions of each structure of the attic platform?The overall structure of the attic platform is assembled without the need for on-site welding. The overall appearance is beautiful and generous. Compared with the concrete structure or the steel structure, the bottom frame itself plays the role of supporting the upper layer, and has the advantages of low cost and high space utilization.The attic platform panel adopts flat plate, patterned steel plate and perforated steel plate to meet the requirements of fire protection, ventilation and lighting on the upper and lower floors of the cargo. For example, forklifts, hydraulic lifting platforms, freight elevators, etc. can be used. The same layer of goods is generally transported by small carts.The attic platform generally has a bearing capacity of 300kg-1000kg/m2. The column is made of a circular tube with strong bearing capacity and low steel consumption. The main and secondary beams can be selected according to the bearing requirements. The relatively economical and reasonable H-shaped steel in the steel structure engineering.The attic platform floor adopts special C-type cold-formed steel plate, which adopts gusset structure. The main and secondary beams are fixed with steel. The whole platform structure is firm, and different floors can be selected according to actual needs. Meet fire, dust, and anti-small parts fall requirements.   

First, Choose pharmacy shelves:Pay attention to the specifications, types, weights, quantities, sizes, etc. of the pharmacy drugs, so that the size of the shelves can be determined. Generally, the shelves of the pharmacies are scattered drugs, and the quality is not particularly heavy, so only light angle steel shelf is ok.If your own medicines are mostly packed in cartons, it is best to use medium-sized shelves so that each floor can hold several boxes and the turnover is faster;   The top of the pharmacy shelf is also available. Generally, those large-volume, but very light, irregular drugs can be placed on top, which can make better use of space.Second, the layout of the pharmacy shelves:Different pharmacies feel different when they walk in. Some pharmacies are very comfortable after entering, and some are particularly depressed. This is inseparable from the layout of pharmacy warehouse shelves. When the pharmacy shelves are placed, the shelf experts remind everyone to pay attention to the convenience of people to buy, because now people want to spend the least time to do more things, no one wants to waste time looking for drugs, so be sure to put those The drugs with a large purchase amount are placed on the shelf at the most conspicuous place.In this way, consumers can purchase more conveniently, and the drugs with fewer purchasers can be placed in hidden places; when placing the shelves, pay attention to the appearance and neatness, which will increase the consumer's desire to shop, and also have related drugs. Put them on the same shelf or on shelves that are not far apart, so that you can buy them.Third, the pharmacy shelves have their own unique advantages:  It is very beautiful in appearance and very fine in workmanship, which is one of the reasons why these shelves are favored by so many customers.  The structure of these shelves is very reasonable, suitable for placing drugs of different sizes and quality, and its design is also conducive to improving its load-bearing capacity.   The good pharmacy shelf also have different specifications. Some brand shelf manufacturers will design special shelves according to the characteristics of different types of drugs. They can also be designed according to the characteristics of hospital pharmacies.

Advantages Of Warehouse Mezzanine Rack:1. Fully assembled structure, movable, adjustable, detachable, simple and flexible; multiple uses (office, production, service, warehousing);2. Can increase the utilization rate of several times on the existing site, the storage rate can reach 90%, convenient warehouse management, saving human cost;3. The column, main beam and auxiliary beam adopt optimized section, good load bearing performance and solid overall structure;4. After the surface of all parts of the shelf is derusted, degreased and phosphatized, the epoxy resin is sprayed with electrostatic powder;5. Free on-site design of professionals, according to the actual situation of your warehouse design, after detailed understanding, you can make a variety of plans for you on the spot, giving you an investment budget;  

   Convenience store shelves should be cleaned once a week. Shelf maintenance can be used to maintain and protect the shelves through general methods such as shelf maintenance.   When using a cleaning care product, swing it evenly, then spray the liquid onto the cleaning cloth and gently wipe the convenience store shelf. After using the cleaning cloth, remember to wash it and dry it.  Convenience store shelves should not be placed in high temperature places, adjust to comply with operating procedures, and do not overload the use of shelves.   Clean and tidy objects and accessories should be placed neatly, and convenience store shelves and goods should be Placed well.   Lubricating oil should be refueled or oil changed on time, no dry friction phenomenon, check the shelf of the convenience store is normal, and the color bright layer is clean. 

   The average fruit shop is usually not too large in size, so it is not suitable for choosing the larger fruit shelf . When selecting the size of the fruit and vegetable rack, it is necessary not only to ensure the display effect, but also to facilitate the customer to take it.     Because the overall height of the fruit and vegetable rack should not be too high, otherwise it will affect the customer's line of sight, so the choice of the number of shelves is generally four layers. Otherwise, increasing the number of layers in the case of controlling the height of the shelf will make the entire display space very crowded and affect the visual effect.   The supermarket fruit and vegetable racks are also the same as the supermarket shelves. The product placement must be stable and not easy to fall. And the choice of materials must be in line with the positioning of their own fruit and vegetable supermarkets, you can choose wood products shelves, steel and wood combined shelves.

    Heavy duty racks are one of the most commonly used shelves, with each layer bearing more than 500Kg. It has good picking efficiency and can store heavier items, but has a lower storage density. Heavy duty warehouse racks, also called pallet rack , have the characteristics of large bearing, wide adaptability, mechanical access, high selection efficiency, but the space utilization is general. Widely used in manufacturing, third-party logistics and distribution centers, etc.. It is suitable for a variety of small-volume items, but also for a small variety of large-volume items. Such shelves are most commonly used in high-bay warehouses and ultra-high-end warehouses (most of the shelves in automated warehouses use such shelves).

Mezzanine racks are a type of modern storage shelves. They are different from ordinary shelves, and combine the characteristics of traditional shelves with their own special advantages. The structure of Mezzanine racks is similar to that of real-life lofts. They combine shelves with steel into a platform and have great advantages. Their use effectively complements the shortcomings of other types of shelves in actual storage, and the work in the warehouse is more orderly and efficient.The structure of Mezzanine racks is similar to that of real-life lofts. They combine shelves with steel into a platform and have great advantages. The attic shelf is like a loft. It can be divided into multiple layers. Generally, two floors and three layers are common and can be customized. At the same time, the bottom shelf acts as a pillar, so it saves costs to a certain extent. And its shelf form is suitable for putting all kinds of goods in various types. Their use effectively complements the shortcomings of other types of shelves in actual storage, and the work in the warehouse is more orderly and efficient.