Blog

Cantilevered racks are suitable for storing long materials, ring materials, plates, pipes and irregular goods. How to install cantilever racks?The special profile is used as the base, and the two C-shaped steel back-to-back joint steel plates are welded together. The width of the connecting steel plate is the width of the column.After the two pieces of C-shaped steel are welded, connect the bolt  at the position of the connecting column to facilitate connection with the column.The bottom plate is welded to the bottom plate to facilitate the connection of the expansion bolt to the ground.

The loft platform has become a part of our life. No matter where you go, you can see the existence of the loft platform, a small shop, a grocery store, etc., all placed on the attic platform and then set off. A beautiful supermarket is built with a variety of attic platforms. Since the use of the attic platform is so common, how do we buy a supermarket loft platform? What are the skills?Quality: This is an important factor that must be considered when purchasing any product. For the quality of the Mezzanine, we can look at the surface treatment of the attic platform, whether the surface coating is smooth, flat, consistent in color, and the welding of the attic platform. Process, just look at whether there is a solder gap, etc. In addition, it is the material of the attic platform, and there is no uniform standard for the material of the attic platform.Safety performance: The supermarket loft platform is also placed with some heavy objects, so it must also meet the general basic requirements of the loft platform, that is, the safety of the loft platform. The different supermarket require different loft platforms. The load and structure are different. When choosing, you must choose the most secure loft platform based on actual needs.Style: The role of the supermarket loft platform is to place the merchandise for the customer to choose. Therefore, when choosing the supermarket loft platform, we must consider the structure of the loft platform, whether it is convenient to place the merchandise, it is not firm, and the column should be bent. The uniform condition, the more uniform the better.Aesthetics: Customers entering the supermarket are the supermarket loft platform. Therefore, when choosing the supermarket loft platform, we must pay attention to the beauty of the loft platform. A beautiful loft platform can give people a beautiful and harmonious feeling. Satisfy people's shopping feelings.Consider the diversity of the goods. Different goods need to choose different types of attic platforms. For example, some goods need to be hung up, and the attic platform is required to have accessories such as hooks.Applicability: Regardless of whether the attic platform you purchased is expensive or cheap, you should consider whether this attic platform is suitable for you. Choosing a suitable attic platform is far better than choosing an expensive but not suitable one.

A brief summary of several points that should be noted when selecting storage shelves(1) Plant structureWhen the storage equipment is selected for the shelf, the effective height under the beam must be considered to determine the shelf height. The position of the beam and column will affect the configuration of the shelf. The strength of the floor and the flatness of the floor are also related to the design and installation of the shelves. Also consider the installation location of fire protection facilities and lighting.The shape and size of the stored items are directly related to the selection of the shelf specifications. The weight of the stored items directly affects the strength of the shelf. The units to be stored are stored in any unit, and the pallets or storage cages or items have different shelf selection types. In addition, the estimated total number of storage digits must take into account the company's growth needs in the next two years. This information can be obtained through analysis of the storage system, or we can ask our Heda shelf to give some professional advice before design.(3) AccessibilityGeneral accessibility and storage density are relative. That is to say, in order to obtain a higher storage density, it is necessary to sacrifice the accessibility of the article. Although some types of shelves can obtain better storage density, their storage management is more complicated, and it is often impossible to control the FIFO. The best is that the three-dimensional automatic warehouse can be developed upwards, with excellent accessibility and storage density, but the relative investment cost is relatively expensive. Therefore, what type of storage device is chosen is a compromise between various factors and a strategy application. For comparison of accessibility and storage density of various types of storage devices, you can call us.(4) Handling equipmentThe access operation of the storage device is done by the handling device. Therefore, the selection of storage equipment requires consideration of handling equipment. The stacker is a universal handling device, and the shelf channel width will directly affect the selection type of the stacker, which is a counterweight or a narrow channel.(5) Inbound and outbound volumeAlthough some shelves have a good storage density, but the amount of storage and delivery is not high, suitable for low-frequency operations. The high volume of inbound and outbound storage is very important data, which is a consideration for the choice of shelf form.

The heavy duty pallet rack is made of high quality cold-rolled steel plate by roll forming. The column can be up to 6 meters without joints in the middle. The beam is made of high quality square steel. The bearing capacity is large and it is not easy to be deformed. The hanging piece between the beam and the column is a cylindrical protrusion. It is reliable, easy to assemble and disassemble, and uses locking nails to prevent the crossbar from picking up when the forklift is working. The surface of all the shelves is treated by pickling, phosphating and electrostatic spraying, anti-corrosion and anti-rust, and beautiful appearance. Suitable for large warehouses.Medium duty rack with unique shape, reasonable structure, convenient assembly and disassembly, no screws, and strong.It has a large carrying capacity and is widely used in shopping malls, supermarkets, enterprise warehouses and public institutions.Lightweight shelves: Lightweight punching shelves are a highly versatile structural system that can be used in a wide range of light duty racks, workbenches, tool carts, suspension systems, safety nets and support frames. The length of the punched angle steel can be quickly cut by scale, assembled, modified and re-installed with screws, so that it can meet the needs of careful planning and emergency use. 

Rack is essential for storing items in daily life, especially large and medium-sized warehouses. The use of shelves is more common, and the rational use of warehouses is regulated. The application advantages of shelves in warehouses are mainly as follows.Three-dimensional structure, which can make full use of warehouse space, improve warehouse capacity utilization, and expand warehouse storage capacity。convenient access to goods, can be first-in, first-out, 100% selection ability, smooth inventory turnover。The goods in the warehouse shelves, at a glance, easy to count, divide, measure and other important management work.To meet the needs of large quantities of goods, a wide variety of storage and centralized management, with mechanical handling tools, can also achieve storage and handling work orderly.The goods stored in the shelves are not squeezed out of each other, and the loss of materials is small, which can completely guarantee the function of the capital body and reduce the possible losses of the goods in the storage link.To ensure the quality of stored goods, you can take measures such as moisture, dust, anti-theft, anti-destruction, etc., to improve the quality of material storage.Meet the management needs of modern enterprises with low cost and high efficiency logistics supply chain.Large bearing capacity, not easy to deform, reliable connection, easy to disassemble, diversified, the surface of all shelves are treated by pickling, phosphating, electrostatic spraying, anti-corrosion, anti-rust.

The beam rack is one of the storage shelves, and belongs to the heavy duty rack. In fact, the beam rack is simply referred to as a selection shelf, a cargo shelf, a pallet shelf, and so on. The beam rack are simple in structure, safe and reliable, and can be arbitrarily adjusted. The access to the library is not limited by the order of the items. Widely used in storage mode for pallet storage and forklift access.Column group: consists of a column, a tie rod, a diagonal rod, and a back-to-back connecting rod. The column is generally made of 88*68*1.8. The height can generally be customized according to the different needs of customers, usually a multiple of 75mm.Beam: It consists of a measuring rod and a column card. The beam rods are P-shaped, square-passed, and reinforced beams. The column card is connected by a beam column, and the column is provided with an adjustment hole of 75 mm. The beam can be adjusted up and down.Supporting devices: cross rafts, steel laminates, barriers, etc. The matching device can be selected according to actual needs.Safety device: anti-collision bar, anti-collision column, foot protection, etc., when the mechanical equipment is operated, it can prevent accidental impact on the shelf and protect it.Related equipment: such as pallets, storage cages, steel boxes, metal cages, forklifts, etc. 

Strengthen the basic management of stores, create a good shopping environment and atmosphere, merchandise display and health work is the most important basic work of the store, we must focus on doing a good job. Supermarket shelf resources are small, we must pay special attention to the display of goods, supermarket goods display in addition to following the general display principles should pay attention to the following aspects:Goods should be sorted and replenished at all times, keeping them neat and plentiful.Make full use of the supermarket shelf resources, the spacing of the laminates is about 2 to 3 cm higher than the product, and the spacing between the laminates cannot be too large, exposing the back net and the back panel (including the top layer).Supermarket goods display surface should be controlled, no more than 3 sides to ensure the number of varieties.The supermarket cash register service desk is an important place for supermarkets. It is necessary to make full use of the factory small commodity display racks (such as chocolate, chewing gum, hot and cold drinks machines, etc.) and display them on the checkout counter to make sales of these small commodities while maintaining these small display racks. Neatly regulated display.Supermarket goods display should also pay attention to color matching.Supermarket shelf, Supermarket shelving, Supermarket shelves.  

1. Beautiful appearance, firm structure and various specifications; specially design style, supermarket shelves are single and double-sided shelves can be combined with each other, single-sided shelves can be combined with corners, double-sided can be combined with semi-circles; layer spacing can be adjusted freely , looks noble and generous;2. Luxurious appearance, elegant color, and integration with the modern store environment, creating a new concept of business;3. Raise the root of the support arm, increase the supporting capacity, increase the width and length of the laminate, and satisfy the capacity of the large-scale shopping malls;4. The surface is treated by epoxy resin electrostatic spray, which has a variety of colors and has strong anti-corrosion and anti-rust effects;5. Easy to install, any choice of multiple hangers;6. The column and the base are welded together, which increases the shelf insurance factor, prevents the shelf from grading under the heavy state, and eliminates the hidden dangers of the store;7. Good versatility, equipped with a variety of accessories for the display of goods, suitable for the needs of comprehensive supermarkets.www.hedaracking.com

In general, there are heavy duty racks, pallet racks, beam racks, drive in racks, shuttle racks, etc., which can be placed on pallets. They basically need to rely on forklifts to access the pallets, so it is generally Used in large warehouses.The pallet rack is to place a pallet for emptying on the shelf, which is convenient for accessing the storage racks of the goods by using auxiliary storage devices such as forklifts and elevators. The pallets used are based on the specific properties of different goods, some are wooden pallets, some are steel pallets. Then, which types of storage shelves are convenient to use the tray as an auxiliary access. What are the benefits of a shelf with a tray?The form of storage shelves generally used is basically of the type of pallet rack. They are all free to place the tray. For example, heavy duty racks, as well as shuttle racks, drive in rack, and automated three-dimensional shelves often place trays for easy access to goods. From the perspective of operation mode, it can be divided into a drive-in pallet rack and a gravity pallet rack.Heavy duty pallet racks can be said to be one of the more commonly used racking systems for companies. It is famous for its large load capacity, small footprint and stable shelves. Adding different materials and different sizes of trays on each layer, the goods are placed on the trays for easy insertion, and the surface wear of the heavy shelves is also reduced and the storage safety of the shelves is ensured. At the same time, the tray can also reduce or prevent the environmental impact of the moisture of the goods caused by the direct contact of the goods on the shelves.In the three-dimensional shelves, such as through shelves, shuttle shelves, attic shelves and so on. Since these three-dimensional shelves are picked up and stocked by storage equipment such as high-end forklifts and stackers, the insertion holes under the trays facilitate the direct insertion of forklifts and the like. For large-scale storage activities, setting a label on each tray facilitates the need for inventory management, and does not mess up the position when moving the tray.The pallets on the storage shelves allow the storage of the goods to form a cell style, and each completed cargo forms a unit and a cargo space. Therefore, they are also called cargo-type shelves. Such a storage method has a high storage density and does not cause confusion between goods. If modern technology is added, intelligent control and management can be realized. Pallet racks are widely used in manufacturing, third-party logistics and distribution centers, etc., and are suitable for a wide variety of small-volume items, as well as for a wide variety of large-volume items.

   For the simple maintenance of warehouse shelves, generally, the design of  warehouse shelves is relatively simple, so maintenance will be very simple.   The first is the cleaning of the shelves: cleaning is very important for a shelf, because storage shelves are usually placed in the warehouse, and some units of the warehouse are generally few people. Only when you need something, will you rush to get it, and then hurriedly leave. So very few people go to clean the shelves. Frequent cleaning of the shelf will extend the shelf life. The cleaning of the shelf is not necessarily washed with water, as long as there is no dust on it. And washing the shelves with water is easy to oxidize the surface of the shelf, greatly reducing the shelf life.   Then put the shelves neatly: tools, accessories, products should be placed neatly, pipes, lines must be organized to avoid blocking the passage. Moreover, the neatly arranged shelves are not easy to hit, increasing the safety of the shelves and goods!    Finally, it is safety. Be sure to remember the weight of the shelf. Do not put the goods beyond the weight to avoid a safety accident.

The reason for the collapse of the shelf may be that the shelf is hit by the forklift; when the shelf is hit by the forklift, there will always be a large chance of collapse at this time or later due to structural damage or crushing load. What measures can we take to reduce the possibility of collapse?Establish a wide aisle space, although the maximum space utilization is a key goal of any warehouse, but safety is the first. Many companies arrange their racking channels when the forklift manufacturer provides a "minimum" passage for the forklift involved. The minimum may be too narrow, especially for inexperienced drivers. Because the aisle trays are ubiquitous, the width of the tray should be considered on both sides of the aisle. The more spacious channel also allows the driver to work faster in the channel, increasing productivity.Install a crash barrier, which is a cheap and simple way to protect the shelf. The shelves in the corner row are most susceptible to impact by the forklift, so any type of foot guardrail can be used to prevent the shelf from being damaged by the forklift.To increase the speed limit of the forklift, the speed of the forklift should not exceed 8 miles per hour, and the speed near pedestrians should not exceed 3 miles per hour. Low speed operation should also apply to the tray rack area. In the aisle, close to the corner or shelf tunnel should be the "slow walking" area of the forklift.The reason for the collapse of the shelf may be overloadIf the beam is not damaged, there are insurance pins, and a stable tray is attached to them, it should be noted that the load of the beam also needs to be evenly distributed.The load carrying capacity of the beam also depends on the uniform distribution, and if the decorative panels are used instead of placing the pallets flat on the beams, they will also change. Beam loading can be compromised with damaged pallets or high density loads.The reason for the collapse of the shelves may be the poor design of the shelves.Depending on size, weight and density, the rack is typically designed for a specific load. Incorrect design can cause a crash.When designing the shelf structure, factors such as the use requirements, equipment conditions, load properties, material supply and installation conditions should be comprehensively considered, and structural forms, construction measures and materials should be reasonably selected to achieve advanced technology, economical rationality, safety and application, and quality assurance.

Cantilever racks are widely used . What is a cantilever rack? What is the composition and application of the cantilever rack? Guangzhou HEDA Shelves Co., Ltd. will help you answer and choose the good quality cantilever rack for you. Guangzhou HEDA Shelves products are widely used in warehousing and logistics, shopping malls and supermarkets, toy gifts, food and beverage, industrial machinery, hardware and electrical appliances, store display, export trade fairs, household goods and other aspects. Guangzhou HEDA Shelves Co., Ltd. constantly improves the management system, surpasses itself, thinks what customers want, and provides customers with suggestions on overall layout design, shelf placement and so on. Provide complete cargo distribution, shelf installation and other services.What is a cantilever rack? The cantilever rack is composed of a column, a column beam and a cantilever. The column adopts automatic pre-filled rolling double-type C-type special-shaped steel as the column, and 200 and 140 I-beams are used as the bottom beam. The column beam adopts special trapezoidal plate and is connected by high-strength bolts. The cantilever beam is a double inner flanged C-type butt weld. The cantilever beam and the column are connected by a galvanized pin plate. The column sets are connected by connectors. (H-shaped steel or cold-rolled steel is used for the column, and the cantilever is square tube, cold-rolled steel or H-shaped steel. The cantilever and the column are plug-in or bolt-connected, and the base and the column are bolted.) One-arm load can be used Up to 1000kg or more, the specially reinforced column structure can withstand 2000~3000kg pressure. Combined structure, special profile column, designed to increase the stability of the back pull, with high-strength cantilever (arm can be single-sided or double-sided), with a light structure, good load capacity, high space utilization and so on.