Blog

   Anti-collision protection. Most of the most vulnerable shelves are the passages and the columns at the corners, which are usually deformed by forklifts. Shelf suppliers are provided with matching anti-collision columns for different shelves, channel widths and shipping tools. A crash barrier should be installed at the channel location. The installation of anti-collision columns plays a very important role in protecting the shelf columns.Anti-pressure. Different sizes of shelves are designed according to load-bearing design. Therefore, the weight of the goods placed on the shelves must be within the weight of the shelves. It is best for the warehouse cargo manager to carry the load-bearing and load-limiting logo on the shelf. It is necessary to follow the principle that the weight of the bottom of the shelf is light, that is, the bottom layer is heavy, and the upper layer is light.Moisture-proof sunscreen and rainproof. Although the shelves and beams are all made of metal and have a lacquer on the surface, after being exposed to the sun, the rust may occur over a long period of time, which may affect the service life.Specify a person to use the pusher. In particular, heavy-duty and high-rise warehouses must be equipped with powered push-up vehicles. The use and operation of push-up vehicles must be operated only by licensed personnel.Specify standard card size and delivery size.Specify the system for the use of shelves. Different warehouses, different goods, and different warehouse shelves have different ways of using them.Warehouse managers must develop a shelf-use system that allows each shelf user to learn and follow, which is the ultimate way to achieve goals.

Warehouse mezzanine rack, usually using medium duty shelves or heavy-duty shelves as the main support plus floor panels, which are usually made of cold-rolled steel slabs, patterned steel slabs or steel slab slabs.The Warehouse mezzanine racking is to build an intermediate loft on the existing work site or shelf to increase the storage space. The loft-style shelf can store two or three layers of small pieces of goods.Warehouse Mezzanine Racks features:1. Attic shelves can increase the height of the shelves, make full use of the storage height, and make better use of the storage space.2. Mezzanine Rack floor laying special shelf , compared with the pattern steel plate or the rigid grid, the layer load capacity is strong, the integrity is good, the layer load is uniform, the surface is flat, easy to lock and so on.3. The attic shelf fully considers humanized logistics, with beautiful design and generous structure. Easy to install and disassemble, it can be flexibly designed according to the field.4. Mezzanine Racks are suitable for storing many types of items.

It mainly stores various mold items and is divided into standard mold racks and full-open mold racks according to the requirements of layer load capacity. The top of the shelf can be equipped with a mobile car to facilitate the lifting of the mold.Standard mold frame specification: L3100*D615*H2000*3 grid 4 layersLoad: 800 ~ 3000KG / each layer, Customized according to specific requirements   Safe and reliable: additional positioning device, safe and reliable use;Easily operation: bearing combination, smooth sliding, and independent hanging device;Simple structure: assembled from a variety of composite parts for easy transportation, installation and disassembly;Saving space: The floor space is only 1.9 square meters, which can store dozens of medium-sized molds, which saves space and facilitates the maintenance and management of molds.Scope of application: used to place all kinds of die-casting molds, plastic molds, metal molds, powder metallurgy molds, extrusion molds, etc. 

The shuttle rack is composed of a shuttle shelf, a radio remote control trolley, and a forklift to form a high-density storage system. The trolley can be run on the track under the tray. The shelf system has high storage density and convenient access to the stock. The access method of the goods can be advanced first-in, first-out, safe and efficient.High-density storage, high warehouse utilization;High work efficiency and greatly reduced work waiting time;The lighting requirements are relatively low, and the overall investment is less than other types of shelves;High safety factor, reducing the collision between the shelf and the forklift, and improving safety and productivity;The operation mode is flexible, and the way of accessing goods can be realized first-in, first-out, or advanced.Widely used in a large number of samples, such as food, beverages and other single varieties in large quantities, relatively single item industry; cold storage operations: such as reducing low temperature operation time, improve work efficiency and operational safety. Term management: A warehouse that has strict requirements for batches of goods and requires first-in-first-out operations.

The shelves should store goods. Generally, the goods are pre-processed by pallets, storage cages, etc., and then placed on the shelves by forklifts.The structure of the shelf is stable. The expansion pins of the pallet rack must be installed to ensure the stability of the pallet rack.Pallet storage shelves are suitable for work such as forklift lifting equipment.The number of layers of the pallet rack can be determined according to the height of the warehouse, the height of each pallet, and the like. The bottom layer can be used without the beam, so that the pallet is placed directly on the ground.Design and manufacture of the installation pallet rack should fully consider the specific conditions of the warehouse, such as the traffic lane between the shelf and the shelf, the weight of each cargo per floor relative to the shelf bearing capacity, the distance of the designed delivery pallet and the shelf, Height and other issues. The comprehensive consideration of these basic factors is for the long-term function of the pallet racks in the process of manufacturing, and installation.

The raw materials of the Wire Rack are made of high quality cold wire drawing, forming a 50*50 mesh, with reinforcing ribs at the bottom, and bending on both sides of the shelf beam to ensure cargo safety. The general load can reach 3T, and the surface treatment is galvanized and sprayed.1. Visualization and convenient management.2. The mesh type laminate is firm and has strong bearing capacity, which is convenient for bulk cargo cleaning and storage.3. Install mesh-type laminates for storage of 1-3T goods4. Mesh-type laminate installation does not require any tools and can be placed directly between the beams5. Manual storage, no need for tray storage6. Mesh-type laminate design prevents items from falling from the sky.7. The installation of the mesh-type laminate allows the tray to be sized on the shelf.8. It is welded by strong iron wire, and the bottom is strengthened by U-channel welding, and the structure is stronger;9. With heavy-duty shelves, it saves costs and is placed securely.

Heavy-duty racks in narrow lanes are usually used in logistics center warehouses for frequent cargo in and out. This shelving system is designed with heavy-duty shelves as the foundation. Used by a combination of two sets of heavy-duty shelves designed back to back. A roadway is formed between the two sets of shelves. However, the lanes between the two rows of shelves are relatively narrow and can only accommodate the next forklift. This type of racking system must use a three-way stacker forklift truck to enter the aisle and insert the goods at multiple angles while the main engine is moving in a small range. Because of the characteristics of this shelving system, they provide significant warehousing efficiency and cost advantages in the storage logistics center.The characteristics of the narrow roadway shelf are: because the roadway is narrow, the shelf storage utilizes limited space; the guide rail on the narrow roadway is the guiding tool of the forklift, which can reduce the wrong operation of the forklift driver to some extent, and may cause damage to the shelf.Reasons for using logistics warehouses and storage center warehouses to use narrow lanes are:The volume of goods in the warehouse is relatively dense, and the entry and exit of goods is relatively frequent.Storage and logistics centers urgently need to increase the number of storage spaces or require a certain amount of storage, which has a high level of logistics efficiency requirements.If the height of your warehouse is large, the actual space available for the shelves is more than 8M and above, you can consider using a narrow roadway racking system.A separate storage forklift can be used for the forklift.

The shuttle racks are high-density automated storage systems consisting of shuttle trolleys, shelves and forklifts. Because of its relatively low input cost and high storage efficiency, it is very popular. The dense movement of goods is carried out by the directional movement of the shuttle automatically controlled on the shelf. It has the characteristics of large storage density, convenient access, high access efficiency, low maintenance cost and high security.Features and advantages of shuttle shelves:1. Shuttle rack is an advanced warehouse storage management mode, featuring high storage density, convenient access, high access efficiency, low maintenance cost and high security.2. The shuttle rack is a storage system with high-density storage and a certain automatic operation. It can be integrated with an automated stacking system into a fully integrated fully automated storage system. It is one of the economic and practical means to replace the automated three-dimensional shelf.3. The shuttle rack storage system injects a new concept into the integration of cargo storage and space. This new storage system makes full use of space with more powerful storage capabilities. This new storage method will bring a new choice for storage space utilization. According to statistics, the use of a shuttle rack storage system will enable space utilization of more than 80%!4. The shuttle rack can realize the FIFO mode of advanced first-in, first-out.

Heavy-duty storage racks are pallet-type shelves used to store pallet goods, consisting of columns and beams. Cantilever racks are generally used to store long strips or ring-shaped materials and irregular items, and are composed of columns, cantilevers and bases. The following are the similarities between the two types of shelves.1. Bearings are important, both horizontal and diagonal, to enhance the bearing capacity and stability of the shelf; there are main and sub-frames, you can use the main frame alone or the main and auxiliary frames.2. The height of the floor can be adjusted: the holes on the heavy-duty storage shelves and the cantilevered shelves are 50mm or 75mm, and the beams and cantilever beams are adjusted in heights of 50mm or 75mm.3. Heavy-duty storage shelves and cantilevered shelves have large load-bearing capacity. The stability and safety requirements of the shelves are high. When installing, the bases of the shelves should be installed with feet, and then fixed with the expansion bolts to prevent the shelves from collapsing.4. Heavy-duty storage shelves and cantilever shelves are suitable for manual access or forklift storage.The above are the same points of heavy storage shelves and cantilevered shelves. Of course, these two types of shelves are suitable for different warehouses. Heavy-duty storage shelves are suitable for pallet storage, and cantilever shelves are used to store long strips and other materials that cannot be stored in pallets.

Advantages of installation and disassembly of custom cantilevered shelves in Guangzhou: Below, Heda shelves will introduce the 8 advantages of cantilevered shelves.1. Cantilevered shelf is a detachable and configurable shelf type, which greatly increases the inventory of the warehouse and increases the effective planning of the warehouse;2. It can ensure that the storage of the goods maintains a certain quality and can effectively prevent moisture and damage;3. The cantilever beam can be designed on one side or both sides according to the situation of the warehouse site. The goods are placed against the wall, the goods are entered on one side, and the goods are arranged in the center of the warehouse to improve the storage of the warehouse and facilitate the entry of goods.4. The column and the base are usually I steel or cold rolled steel, and the cantilever may be the above material or square tube. The three components are bolted and can withstand a weight of 2 to 3 tons.5. The total height of the cantilever frame does not exceed 2 meters, the width does not include the arm length not exceeding 2 meters, and the single arm can bear the weight less than 800 kg;6. Although the overall metal composite structure, in order to prevent material damage, the wood gasket or rubber gasket is added to the cantilever beam, the specification and bearing capacity are not static, and can be customized according to actual needs;7. For more flexible storage of goods, such as bulky but bulky cargo, steel or wood laminates or meshes can be added to the cantilever beam, especially for warehouses with small spaces and low floors;8. Cantilevered shelves are not separate shelves. Multiple rows of columns can be connected to form a row of shelves, enabling each shelf unit to be sorted and stored in different categories of goods, effectively storing wood, pipes, slivers and other similar products. The column is equipped with an adjustable clip consisting of 3x4 cantilever beams and stringers.The cantilevered shelf warehouse is mainly hand-loaded. Its most prominent feature is processing and customization. According to the restrictions of the site, the specifications of the warehouse goods are determined.

The style of the supermarket shelves can be divided into several aspects, such as structure, material and backboard style. According to these aspects, we will briefly introduce the style of the shelves:Structure - single-sided supermarket shelves, double-sided supermarket shelves and four-sided supermarket shelvesMaterials - iron shelves, steel shelves, steel wood shelves and wooden shelvesBackplane - Sunshine backplane, wood backplane, mesh backplane and hole backplane

It can make full use of the warehouse space, can be arbitrarily adjusted and combined, the structure is simple and reliable.Light duty, strong carrying capacity, low cost, quick installation and disassembly. The load-bearing capacity of each layer can reach 300-500kg/layer.It is suitable for storing small batches, multi-variety, small items and manual access goods. It is widely used in warehouses, logistics distribution centers, spare parts warehouses, workshop temporary storage areas, production assembly lines, decoration workshops and large supermarkets. .Shelves can realize different deformations and combinations, adapt to the storage of a variety of materials, and can provide Customized products according to customer requirements.All the shelves surface has been processed well and a variety of colors are available for selection. After being treated by sandblasting and other processes, it has the characteristics of anti-corrosion and anti-rust, and the whole is simple and beautiful.Shelf laminates can be selected according to different requirements of customers, such as wood laminate, steel laminate, mesh laminate, etc.