Blog

    The drive-in rack is an assembled rack in which the forklift truck enters the exit shelf and stores the pallet unit goods.The shelf structure can share the forklift working channel and the goods storage space, greatly improving the space and site area utilization of the warehouse, but the goods in the same working channel cannot be first-in-first-out, suitable for large quantities, small varieties or The goods in the work channel flow together to the same customer's goods storage.   The cargo storage channel is also a forklift storage and transportation channel, which is a form of shelf with high storage density.   It is usually used for the storage of goods with a small variety but large batch size and low requirements for the selection of goods.   The goods follow the principle of advanced and backward output, and are suitable for most transportation machinery storage and transportation operations.   Based on the lifting height of the ordinary forklift and the conventional scheme of three-storey cargo shelves, the effective storage capacity of the warehouse can be increased by more than 100%. In contrast, the investment cost is controlled and the benefits are significantly improved. From the global storage cost calculation, generally increasing the storage capacity benefit within three years can offset the investment cost.

  Cantilever storage racking are suitable for storing long materials, aluminum, ring materials and irregular goods. The cantilever can be divided into three series: light, medium and heavy. The cantilever can be single-sided or double-sided, and the cantilever has the characteristics of light structure and good load capacity. After adding steel or wooden shelves to the cantilever, it is especially suitable for warehouses with small space and high bottom. The space utilization rate is high, the access to goods is more convenient and fast, and the storage of goods can be seen at a glance. Can be customized according to the specific requirements of customers.    The cantilever rack is easy to install, reasonable in structure, sturdy and durable, beautiful in appearance, good in layer weight and high in space utilization.   According to the layer load, it can be divided into light duty cantilever shelves, medium duty cantilever shelves, and heavy duty cantilever shelves. According to the cantilever, it can be divided into a single-sided cantilever shelf and a double-sided cantilever shelf.   The shelf pillars are mostly made of special profiles for H-beam or C-beam butt welding. The cantilever is mostly square tube, cold rolled steel or H-shaped steel.   The cantilever and the column are connected by bolts. The base and the column are bolted and assembled. The base is connected with the ground by expansion bolts. The cantilever can be single or double-sided, which has light structure and good load capacity. The single arm load can reach 500kg. The specially reinforced column structure can withstand 2000~3000kg pressure. The design back pull increases the overall stability of the shelf, and the installation is simple and the accessories are complete. Combined structure, special profile column, designed back pull to increase stability, with high-strength cantilever, light structure, good load capacity, high space utilization; after the shelf is added, it is especially suitable for space. The cantilevered shelf is constructed by mounting a cantilever on the column, and the cantilever can be fixed or movable. Pipes and plates are used for storage.

   1. When selecting heavy-duty shelves, it is necessary to consider the form of storage materials and storage time. There may be various materials with different storage times in the warehouse. This requires consideration of the form or storage method of the inbound and outbound warehouses, and finds a really suitable heavy-duty shelf, which can achieve a storage space with high space utilization. For example: drive-in rack, adjustable pallet racks, rolling shelves, mobile shelves, and ordinary high-bay shelves. If you choose such shelves, you may need to invest in certain loading and unloading equipment, such as narrow-track forklifts.    2. Heavy-duty shelves are the types of materials and containers for materials. The size of the heavy-duty shelf needs to be related to the material or container to be carried. The size can be customized according to your own needs. It is best to give the recommended size by the heavy-duty shelf manufacturer. On the one hand, it is relatively professional, on the other hand, if it appears Problems can also be shared with some of the responsibilities.    3. Heavy duty rack loading and unloading equipment. Now that you have the equipment for the placement of the shelves, if you have it, you need to consider the factors such as the radius of gyration of the equipment and the width of the equipment.    4. The selection of heavy-duty shelves also takes into account the ground bearing level of the warehouse itself. This figure needs to be obtained from the contractor. This parameter is very important. If your warehouse has a load of only 1 ton and a shelf load of 5 tons, it will sink or deform, and the weight will even collapse, causing a safety accident. Don't simply consider building a high-bay shelf to save space, but also consider the basic weight of the material stored on the high shelf.   5. the same, but also consider the layout. Many companies are only paying attention to the space utilization problem of the shelf when building heavy-duty shelves, but neglecting the logistics concept, resulting in unsatisfactory work.

    Automated Warehouse (AS/RS) is a three-dimensional shelf, railroad roadway stacker, inbound and outbound pallet conveyor system, size detection bar code reading system, communication system, automatic control system, computer monitoring system, computer management system and others. Complex automation system consisting of auxiliary equipment such as wire and cable tray power distribution cabinets, pallets, adjustment platforms, and steel structure platforms. Using the first-class integrated logistics concept, using advanced control, bus, communication and information technology, through the coordinated action of the above equipment to carry out the warehousing operations.

How to prevent shelf accidents?Anti-overload: The shelves designed by the shelf technicians have a large load. The weight of the stored goods should be controlled within this larger load range, and the smaller load is, the more beneficial it is to safety.Anti-super high and super wide: When the shelf installation is completed, the layer height and the layer width are fixed. The size of the card board and the cargo should be less than 100mm of the net space. If the storage goods change, the combination can be reassembled.Anti-collision: In the warehouse where the forklift truck and other handling equipment access the goods, anti-collision guardrails should be installed, and during the operation of the forklift, it should be handled as lightly as possible to reduce the impact between the handling equipment and the shelf and reduce the damage rate.Anti-heavy weight: follow the rules of cargo storage, so that high-level light goods, low-level heavy goods, that is, shelves from top to bottom, from light to heavy principle, to maintain the overall balance of shelves and storage, more secure and stable.Replace damaged beams and columns in time: In practice, we found that the damage of the beams and columns of the shelves is very common. When the damage is found, the shelf manufacturers should be notified in time to replace them.   As a professional logistics equipment, there are many kinds of products. Many customers are not sure how to evaluate the quality of products and choose the right products when purchasing shelves. Therefore, they often decide everything by price. After buying them, they find that the shelves are not applicable at all, or the quality. But off. In response to this situation, industry insiders pointed out that customers must have some basic parameters of the shelf.

Nowadays, there are many kinds of shelves, which are used in supermarkets or warehouses. Shelves of different sizes are used in different places and directions. So what are the characteristics of the shelves used in the warehouse?First, strong tolerance.Because the products stacked in the warehouse are very heavy, the shelf capacity in the warehouse is very strong. The good and bad tolerance of the shelves are related to the quality of the shelves. Therefore, the quality of the shelves in the warehouse is very good.Second, the capacity is large.The warehouse is the place where the goods are stored, so the capacity of the shelves in the warehouse also determines how many products can be stored on the shelves. Therefore, when companies choose to buy shelves, they will choose to store more shelves. That is, its capacity is large.Third, durableThe shelves in which goods are stored in the warehouse must be durable. Because the warehouse is very large, if there is damage to the shelves, this will not only cause a lot of trouble, but also easily cause safety hazards.However, the shelves in the warehouse are generally not exposed to sunlight all year round, and they are also prone to moisture every rainy day. Therefore, the staff must also be prepared for moisture protection. This will not easily corrode and will extend the shelf life.

Supermarket shelves are shelves in which goods are placed in supermarkets. We make full use of the functions of the supermarket shelves, which not only bring benefits to the supermarket, but also make the space more reasonable. The details determine success or failure. When using and caring for supermarket shelves, the following three points are mainly used:The general supermarket shelves have a total of 5 floors. From the top to the bottom, the 3rd, 4th, and 5th are the shelves with large sales volume. In particular, the third floor and the consumer's line of sight are basically parallel, and they are easily accessible, which is convenient for consumers to choose, so the sales volume is very large. .In the use of supermarket shelves, cleaning is basic. Only supermarket shelves with neat and clean appearance can attract consumers. While ensuring clean and tidy, supermarket shelf users should also regularly check the supermarket shelves to ensure that the supermarket shelves are used normally.Under normal circumstances, the average human vision is from 110 degrees to 120 degrees, and the visible width ranges from 1.5 m to 2 m. The viewing angle when walking in the store is 60 degrees, and the visual range is 1 m. Therefore, the merchant should combine the visual habits of the consumers, and when using the supermarket shelves, it is necessary to ensure the product display surface and increase the purchasing probability.Reasonable use and care of supermarket shelves can not only extend the life of supermarket shelves, but also bring more benefits and make the space more rational use, so we must pay attention to the maintenance of the shelves.

Supermarket shelves refer to the shelves in which goods are placed in supermarkets. There are many goods in the supermarket. If the distribution is very messy, it will cause everyone's dislike. Therefore, it is necessary to reasonably configure and distribute the shelves, the layout of the shelves and the structure of the goods for the supermarket. It is very important, let's introduce the principle of the configuration of supermarket shelves.Area allocation of goodsThe area allocation of goods needs to be determined according to the positioning of the business district, the positioning of the supermarket and the commodity structure of the competitors.Location allocation of goodsThe location of the supermarket shelf determines the moving line of the customer's purchase. Only the reasonable arrangement of the shelf is arranged. The customer's action route after entering the store is distributed according to the order of purchase, and the customer's purchase time is reasonably extended. This requires us to Reasonable shelf position distribution for the needs of different commodities.These two principles are the basic principles of supermarkets for commodity allocation and shelf arrangement. Each of these subcategories needs to be tabulated on the supermarket shelves to form a commodity layout map for the entire supermarket. This map will become late. The standard for the display of supermarket goods on the shelves, in strict accordance with this standard for the display of goods, in order to ensure the sufficiency of goods and the normal operation of the operation. 

Features:1. The flow type strips such as roller type aluminum alloy are used to realize the first in, first out of the goods by the weight of the goods.2. Easy to access, suitable for both sides of the assembly line, distribution centers and other places.3. Suitable for the storage of large quantities of similar goods, high space utilization, suitable for use in auto parts factories.4. Can be equipped with electronic tags to achieve information management of goods.Application:Fluent shelves are widely used in manufacturing, commercial, distribution centers, assembly workshops and warehouses with high frequency of delivery.   Fluent shelf: Roller aluminum alloy, sheet metal and other fluent strips, using the platform's own weight to achieve first-in-first-out, storage Convenient, suitable for distribution centers on both sides of the assembly line.

The pallet rack is a professional warehouse racking for the purpose of accessing pallet goods. The warehouse pallet racking is composed of columns and beams, and the pallet rack structure is simple, safe and reliable. It has the characteristics of large bearing, wide adaptability, mechanical access, high selection efficiency, etc., but the space utilization rate is general.Characteristic advantage1. The structure is simple, safe and reliable, and the combination can be adjusted arbitrarily. The access to the warehouse is not restricted by the order of the items. Widely used in storage mode for pallet storage and forklift access.2. The column piece is formed by bolting the column, the cross bracing and the diagonal bracing. The column piece and the C-type welding beam are inserted into the shelf frame, and are fixed by a safety pin, and the structure is simple and reliable. Each layer can be freely adjusted up and down in steps of 75mm or 50mm.3. The pallet rack has the characteristics of large moment of inertia, strong layer load capacity and strong impact resistance. The maximum layer load of each layer can reach 5000kg/layer under the relative design.4. on the basis of pallet racks to build mold shelves, attic shelves, three-dimensional library shelves, etc. can also be made into special oil barrel shelves.5.The beam shelf can effectively improve the storage height of the warehouse and increase the space utilization rate of the warehouse. Suitable for all types of goods.6. the shape is safe, to prevent the collision of the forklift can also increase the column foot, anti-collision bar. In order to make the layer load safer, it is also possible to place auxiliary structures such as beam retaining, laminating, mesh spanning beams on the beam.7. Low cost, easy installation and operation, and easy to find the location for any handling tool.8. The pallet rack can also be equipped with a laminate, which can be a steel plate, a dense ammonia plate or a grid mesh. In order to use trays of different sizes.

   Anti-collision protection. Most of the most vulnerable shelves are the passages and the columns at the corners, which are usually deformed by forklifts. Shelf suppliers are provided with matching anti-collision columns for different shelves, channel widths and shipping tools. A crash barrier should be installed at the channel location. The installation of anti-collision columns plays a very important role in protecting the shelf columns.Anti-pressure. Different sizes of shelves are designed according to load-bearing design. Therefore, the weight of the goods placed on the shelves must be within the weight of the shelves. It is best for the warehouse cargo manager to carry the load-bearing and load-limiting logo on the shelf. It is necessary to follow the principle that the weight of the bottom of the shelf is light, that is, the bottom layer is heavy, and the upper layer is light.Moisture-proof sunscreen and rainproof. Although the shelves and beams are all made of metal and have a lacquer on the surface, after being exposed to the sun, the rust may occur over a long period of time, which may affect the service life.Specify a person to use the pusher. In particular, heavy-duty and high-rise warehouses must be equipped with powered push-up vehicles. The use and operation of push-up vehicles must be operated only by licensed personnel.Specify standard card size and delivery size.Specify the system for the use of shelves. Different warehouses, different goods, and different warehouse shelves have different ways of using them.Warehouse managers must develop a shelf-use system that allows each shelf user to learn and follow, which is the ultimate way to achieve goals.

Warehouse mezzanine rack, usually using medium duty shelves or heavy-duty shelves as the main support plus floor panels, which are usually made of cold-rolled steel slabs, patterned steel slabs or steel slab slabs.The Warehouse mezzanine racking is to build an intermediate loft on the existing work site or shelf to increase the storage space. The loft-style shelf can store two or three layers of small pieces of goods.Warehouse Mezzanine Racks features:1. Attic shelves can increase the height of the shelves, make full use of the storage height, and make better use of the storage space.2. Mezzanine Rack floor laying special shelf , compared with the pattern steel plate or the rigid grid, the layer load capacity is strong, the integrity is good, the layer load is uniform, the surface is flat, easy to lock and so on.3. The attic shelf fully considers humanized logistics, with beautiful design and generous structure. Easy to install and disassemble, it can be flexibly designed according to the field.4. Mezzanine Racks are suitable for storing many types of items.