Shelf is one of the media to increase warehouse capacity and expand warehouse storage capacity. While it brings us convenience, do you know its daily maintenance measures?The shelf should be cleaned regularly, and the dust on the shelf should be removed with a clean rag. Avoid washing directly with water, because washing the shelf with water can easily cause oxidation of the surface of the shelf and shorten the shelf life. Special precautions should be taken in special weather. When it rains, the warehouse should open doors and windows as little as possible to reduce the entry of outside humid air and reduce the possibility of moisture on the shelves. Or put some desiccant in the warehouse. The shelf needs to be cleaned with a rag after being damp, to avoid the shelf rusting, especially pay attention to the location of the shelf interface, where it is easier to rust. Pay attention to the neat arrangement of the shelves. The tools and items stored on the shelves should be neatly arranged. The pipes and lines must not be stacked to block the passage.In addition, check the size and type of the goods stored on the shelf, pay attention to observe whether the shelf is deformed, check whether the safety pin is complete, the beam, the shelf, and the accessories are damaged. Whether the bolts fixing the shelves are loose, avoid impact when using forklifts in the warehouse, and try to handle them lightly. When you place the goods, you should follow the principle of placing light goods at the top and heavy goods at the bottom to avoid accidents during later use.Only a good maintenance is one of the ways to extend the shelf life.
Attic storage shelves Build an intermediate attic on an existing shelf or work site to increase the storage area. It is suitable for multi-variety large batches or multi-variety small batch cargoes. Generally, light trolleys or pallet traction trolleys are used. The following describes the structural characteristics of the attic storage shelf. 1. The surface is treated with electrostatic powder spraying, and the appearance is beautiful. 2. The material section of the column, main beam and auxiliary beam is optimized, and the bearing capacity is strong. 3. Fully assembled structure, easy to assemble, install and disassemble at will. 4. It can be flexibly designed into two-story or multi-story shelving according to actual site requirements. It is suitable for storing many varieties and small batches of goods, making full use of space. 5. The lower layer is in the form of shelves, and the upper layer can be either a platform or a shelf structure. The bottom shelf can store materials and support the floor, with high flexibility. Attic storage shelf systems usually use medium duty shelf or heavy duty shelf as the support for the main body and floor slabs (deciding which shelf to choose according to the total load of the unit shelf), cold-rolled steel floor slabs, pattern steel floor slabs Or steel grille floor. This type of system has many applications in the auto parts field, automotive 4S shops, light industry, electronics and other industries. In addition, the differences in many factors such as use occasions, stored items, environment, industry, temperature, cleanliness, etc., determine the difference of the shelf system.
Introduction of a series of configurations such as the introduction of shelves by enterprises is to use auxiliary equipment to achieve higher production and operation benefits. In this way, effective cost control is also a key factor. So how to better control the cost, we must first determine the demand, because the difference in different warehouse area, space size and overall pattern, there will be different on the stacking of shelves. Reasonable design and planning will help cost control and savings. First, survey the installation site and measure the size and height of each place. Of course, some warehouses may be preparing shelves at the same time during construction. Although this situation is relatively small, it must be planned. Even if there is such a situation, the warehouse shelves can be designed according to the construction drawings. As long as the size and pattern are more accurate, they can be designed in advance. In the use of the warehouse, the rack needs to be reserved for some other cart space, or there are other auxiliary machinery and equipment stacked. If these spaces are not reserved, wait until the overall design plan is completed, if you need to modify it. It will be troublesome, so planning should be done in the early stage, so as to avoid the need to modify the plan later, it will cause more materials and cost investment, and some of the original materials may not be able to continue because of the original position changes usage of. In addition, the pricing of shelves of the same quality sold in different factories may also be different, so we must determine the quality while conducting cost control and also need multiple comparisons to see which one is more cost-effective. Only in this way can costs be better controlled.
Shelf products of various structures can be seen in shopping malls that are densely populated, as well as small and hidden warehouses. Heda shelves are distributed in various industries through different combinations, and it has become an indispensable application facility in the logistics industry and sales area. Then, with the improvement of modern science and technology, what types of shelf product innovations have been derived? Please see the relevant introductions made by Heda shelf manufacturers for you: According to the weight-bearing classification, Heda shelves can be simply divided into light, medium and heavy shelves. As the name implies, light-duty shelves have a small load-carrying capacity limit, but they have unique stability, safety, and aesthetic effects. They are suitable for storing light and medium-sized items and manual access. Therefore, the electronics industry and small parts warehouses, factories, It is widely used in shopping malls and other places, and can meet storage and display needs at the same time. Medium duty shelves have a load capacity between light and heavy duty shelves, and are suitable for warehouses and large shopping area display shelves. Heavy duty shelves are used in the manufacturing field and storage logistics industry storage Large goods, heavy duty shelves with different structure settings can meet the needs of different industries. Modern production is paying more and more attention to the socialization, specialization and centralization of industrial production. The production is highly mechanized. Automation inevitably requires the timely and rapid and accurate supply and distribution of materials. Shelf management technology is an indispensable part of modern production. According to usage classification, Heda shelves can be roughly divided into two categories: storage shelves and supermarket shelves. Warehousing shelves play an important role in cargo storage and logistics planning; business and supermarket shelves focus on product display effects, attract consumers' attention through shelf design and product placement, and increase sales.
The development of the storage shelf industry is booming. With the application of the storage shelf, it will store more and more items in the later period, and the construction of the storage shelf requires a certain cost. In order to reduce the investment of manpower, material and financial resources, it must be fully utilized The storage shelf space, then do you have any suggestions for improving the utilization rate of the storage shelf? Today, the editor will share with you the suggestions from Heda shelves. The quantity of the same type of goods to be stored is large, the shelf life is long, and the storage operations are not frequent. It is recommended that you design a through-type shelf, that is, the goods stored on the shelf are stacked from one end of the aisle and the other. Out of the warehouse. The advanced cost-out method is adopted, and its construction cost is relatively low, and mechanized transportation can also be adopted later, such as the operation of a forklift. Can also store a lot of goods to achieve the purpose of using space! The quantity of goods to be stored is large, and the frequency of storage is moderate, but the shelf life of the goods is short. You need to process the goods that have been stored in the warehouse as soon as possible. You can choose the shuttle type shelf, which is different from the through type shelf. The two ends of the channel work simultaneously, one end is the cargo storage end, and the other end is the cargo exit end. After the goods exit the warehouse, the shuttle car pushes the remaining goods from the entry end to the exit. Of course, it can also use machinery to help assist in handling. If you need to store more items, you can also choose to design a double-depth shelf, which is an improvement of the through-type shelf. Design two storage locations in the storage depth direction of the shelf, reducing one aisle in the same storage area. If you have other questions, please contact us!
Shelf is a storage product used by Various industries, so what kind of shelf do you need for the oil drum? Let us explain the use of the shelf for you. Oil barrels, as the name implies, are plastic barrels filled with oil. The barrels of goods are placed directly on the shelves and can only be picked up manually. In this way, the barrels stored on the second and third floors are difficult to remove and can only be picked up and down by forklift. If it is placed on the shelf, the oil drum is best placed on the pallet to facilitate the forklift to pick up and down to improve the work efficiency of the workers. It is best to use the pallet storage to make custom heavy-duty racks. The heavy-duty rack is a dual-purpose shelf that can store pallets and bulk goods. The layer load of each layer can reach 2000kg / layer, and the number of layers can be used according to actual use The height of the cargo is adjusted, the material is 90 * 70 * 1.8mm, and the cross beam is 100 * 50 * 1.5mm. Storage racks in the warehouse need reserved channels. The reserved channels can be used for forklifts and manual handling of goods. The heavy-duty shelves are assembled by columns and beams. It is the lower shelf in the shelf. It can not only facilitate the management of goods but also use warehouse space.
The drive in rack is also known as the drive through rack, which is suitable for the storage of less large quantity of the same kinds of goods.The space utilization rate is extremely high and the use cost is relatively low. Into the shelf without a dedicated channel, deposit first by the internal storage of the goods,in order to store again, and at the time of shipment by external goods out first, and then to pickup, called the "advanced". Into the type of shelves design principle is to connect the number of traditional shelves,no special aisle its configuration mode can be divided into two groups into type rack installation and a single set of back to back against the wall, a forklift in and out of all use the same aisle.The storage density of the drive-through shelves is very high, but not "advanced first out".Specifically applicable to the storage of standard cargo units.
Guangzhou Shelf Factory introduces three methods of storage shelf layout , the use of storage shelves is to facilitate the storage and access to goods, but if the advantages of the shelves are not used properly and reasonably, it will be counterproductive, not only can not play the role of the shelves, but also bring a lot of trouble to yourself. Therefore, after purchasing the shelves, the correct and reasonable shelf layout is also a kind of learning, so how to properly arrange the shelves? Correct and reasonable rack placement can help customers save resources and facilitate the storage of goods. There are some tips when setting up the rack. The common placement methods are as follows: First, the open layout:This is a method of arranging large spaces into deep spaces, also known as large space warehouse shelves or open warehouse racks. The open layout is conducive to improving the relationship between storage personnel and storage groups, increasing the utilization rate of storage facilities and equipment, reducing public transportation and structural area, and increasing the utilization rate of storage buildings. However, the shelves of large space warehouses need to deal with the problems of sound insulation and sound absorption of air conditioners, optimize the design of storage furniture and partition facilities, and overcome the shortcomings of large indoor noise, chaos, and large outdoor layout interference. Second, collective storage shelves:Suitable for medium duty storage shelves with less than 20 people. In addition to public space, the group's storage shelves have relatively independent storage functions. Generally, the internal space of a storage shelf is divided into a reception room, a warehouse, and other spaces. Because collective storage shelves not only make full use of the building's public service facilities, but also have relatively independent and independent storage functions, group storage shelves are the best choice for enterprises and units to lease storage space. Third, single storage shelves: Arrange the room on one or both sides of the aisle, and set up service facilities around the room. These rooms are mainly natural lighting, supplemented by artificial lighting. The advantages of single storage shelves are: the indoor environment is quiet, the interference is small, and it is easy to establish close interpersonal relationships with the staff in the same room; the disadvantage of single storage shelves is that the space is not open enough, and the connection between the storage staff and the relevant work unit is not direct. Single storage shelf is suitable for storage facilities that require small storage functions, or small units or enterprises. According to the needs of use, if the organization is large, some small single storage shelves can also be combined into a storage area. These shelf layout methods are the tricks that help us lay out the shelves properly. Proper shelf placement can make us do more with less. Without proper and reasonable shelf placement, the shelf will not function, resulting in half the results and half the effort.
Combined with its own advantages, heavy-duty storage shelves are suitable for a wide range of applications, heavy duty racks are widely used in warehouses, courier companies, construction sites and other places. Due to the strong universality of heavy shelves, it has been widely used in the market. Heavy duty shelves are mainly composed of beams and self-locking bolts. The height and width of beams can be adjusted according to the size of the goods. Most of the large-scale shelves are connected by simple locking methods, which can be disassembled and assembled at will. But heavy shelves are also divided into two categories: one is beam-type heavy duty racks. This structure is not easy to be damaged by external force and has the characteristics of large bearing capacity. The second is a pallet-type heavy duty racks. This kind of shelf installation is very simple. Although it is light in weight, it has a strong carrying capacity and a low price, so it is very popular in the market. According to the different items loaded, different accessories such as baffles, net covers, cage guides, and item protection layers can be installed on heavy duty shelves according to the actual situation. Because the structure of the heavy-duty rack is frame-type, the more layers of the rack, the lighter of carrying capacity. Because the customized nature of heavy-duty brackets is convenient for most users, no matter how many tons of goods can be customized to heavy-duty shelves. Although the loading combination of heavy shelves is more convenient, users should choose different specifications according to the loading requirements, the size of the cargo, the actual space of the warehouse, and the height of the forklift can lift when loading and unloading cargo. It is important to note that in the process of placing the goods, attention should be paid to the order of increasing weight. In order to realize the principles of lightweight high-level and low-level counterweights, the high weight of goods placed on each floor must not exceed the large capacity that the shelf can carry. When loading the cargo, it should be handled gently and placed safely to avoid damage caused by the impact of the forklift on the shelf during the loading process. When storing items on a shelf, remember that people should not stand on the bottom of the shelf to avoid injury or death due to the collapse of the goods. In the heavy shelf transformation, do not use non-standard cardboard pallets. If the materials used are not standardized, the goods will not be stored securely.
Pallet racks play an important role in the logistics warehouse. The market can be freely combined to facilitate disassembly and movement. The position of the beam can be adjusted arbitrarily according to the height of the item push code. Pallets are widely used in storage racks. Pallet racks are generally referred to as heavy-duty racks, which are pallets placed on shelves for space separation, which is convenient for forklifts and elevators. According to the specific properties of different goods, different material pallets are used. Some of them are generally pallet racks formed in the form of storage racks, which are usually used on shelves. They are all free to place trays. Such as traditional heavy-duty racks, as well as shuttle racks, racks and auto three-dimensional racks, they are usually used for cargo storage. From the operation mode, it can be divided into drive-type tray rack and gravity-type tray rack. Heavy pallet racks are arguably one of the most common racking systems in every business. It is known for its heavy load, small footprint and stable shelf life. Add different materials and pallets of different sizes on each layer, and place the goods on the pallets for easy insertion. It also reduces the surface wear of the weight rack and ensures the safe storage of the shelves. At the same time, the pallet can also reduce or prevent the environmental impact of the cargo layer from direct contact with moisture on the shelf. Beam pallet racks are generally used in areas where forklifts access goods, such as warehouses, finished product warehouses, packing box warehouses, and high-level warehouses. The pallet length of the beam tray is generally based on the customized manufacturer, and the size and height of the pallet are designed according to the lifting height of the forklift.
Carton Flow Rack is also know as slip type shelf,or fluency rack.Use roller aluminium alloy ,sheet metal and other fluency.It can be divided into two kinds:Pallet and container according to the load size.Place the goods on the rollers,stock from on side and other side aisle.The rack is slightly tilted to the pickup direction,and the angel of the tilt angle can be determined according to the actual situation.With the weight of the cargo stand,the goods will automatically decline in the direction of gravity and be ready to be taken out .Carton Flow Rack,with its tilted shelves which improve visibility and order accuracy, is the perfect answer for split case or piece picking. The racking is developed from the medium duty racking. Aluminum or steel roller rail are equipped between a pair of beams per layer to form a slope of 3 degree, and under the driven of gravity, product moved from the loading side to the picking side of the rack, "first in first out" of goods are realized. Applications of carton flow racking:(1)The hospital,school and the library(2)The textile and garment industry (3) The machinery and equipment industry(4)Food, cold storage(5)Communication electronics, electrical appliances(6)Logistics warehouse(7)Auto parts, auto 4S shop(8)Pharmaceutical and chemical industry(9)And many others...
Warehouse racking play a very important role in the logistics system. With the increasing flow of materials and the increase in the number of automated warehouses, the number of warehouse racking will be more and more, and it is required to be multifunctional and to achieve the requirements of automation and mechanization. The characteristics of the warehouse pallet racks are as follows: The warehouse pallet racks has a large bearing capacity, and the warehouse pallet racks can carry up to 5000kg per floor, which is fast and easy to access. It is the most widely used pallet type cargo storage system and has strong versatility. The structure is that the warehouse racking are divided into several rows along the width direction of the warehouse, and an aisle is left in between for stacking cranes, forklifts or other handling machinery to pass. Each row of shelves is divided into several rows along the longitudinal direction of the warehouse, and is divided into several layers in the vertical direction, thereby forming a large number of cargo spaces for pallets to store goods. Each pallet can be stored or moved independently, and warehouse shelves make the loading and unloading process easier and faster. It can adapt to various types of goods, and the height of the beam can be adjusted according to the size requirements of the goods, so that the upper space of the warehouse can be used as much as possible. The supporting facilities are the simplest, the lowest cost, and the installation and removal are extremely convenient. The warehouse racks are made of high-quality steel, and the surface is treated with electrostatic spraying, which is anti-corrosion / rust-proof / strong and beautiful. Its various specifications and load-bearing designs can meet the requirements of factories, warehouses, assembly lines, warehouse supermarkets. When you need shelves with a load of 100-150kg per layer, this kind of shelves is the ideal choice and can also be used as a platform. Therefore, light duty shelves are suitable for use in factories to store light bulk items and warehouse supermarkets. It is assembled by plug-in method, easy to install and disassemble, and has a wide range of uses. Our factory mainly manufacture various warehouse racks, warehouse pallet racks, Heavy Duty Rack, Cantilever Rack, Mezzanine Rack and so on. Any need please feel free to contact us at heda@hedashelf.cn.